Disk boot failure
April 12th, 2007, 7:49
When I start the PC i receive the message "Disk boot failure, insert system disk and press enter".
1.I try to reinstal the opperating system, but I can't see my HDD to format/instal.
2.I put the HDD to another PC (as secondary), but the opperating system can't see the HDD.
3. In bios, the HDD is detected.
Is there any possibility to repair the HDD. Any utilites?
The HDD is MAXTOR 80GB 7200, 8MB cache, ATA
Best Regards,
AF
1.I try to reinstal the opperating system, but I can't see my HDD to format/instal.
2.I put the HDD to another PC (as secondary), but the opperating system can't see the HDD.
3. In bios, the HDD is detected.
Is there any possibility to repair the HDD. Any utilites?
The HDD is MAXTOR 80GB 7200, 8MB cache, ATA
Best Regards,
AF
April 12th, 2007, 9:08
Is HDD seen correctly in BIOS?
(i.e. Proper model number)
(i.e. Proper model number)
April 12th, 2007, 9:28
pcimage wrote:Is HDD seen correctly in BIOS?
(i.e. Proper model number)
Yes. Correct
April 12th, 2007, 10:47
OK,
What does MHDD make of it?
Does it ID and scan OK?
What does MHDD make of it?
Does it ID and scan OK?
April 14th, 2007, 12:08
pcimage wrote:OK,
What does MHDD make of it?
Does it ID and scan OK?
MHDD won't work (I can see only half letters from every row), but i resolved the problem with SeaToolsDOS from Maxtor.com
Thanks for everybody!
April 16th, 2007, 3:40
When you power up the pc, what's the model name for the drive that is shown?
April 16th, 2007, 5:27
dmarques wrote:When you power up the pc, what's the model name for the drive that is shown?
Now? After I resolved the problem? MAXTOR 6Y......
I can't remember if the model name shown before was the same...
Why?
April 16th, 2007, 5:34
Forget about it. 
Powered by phpBB © phpBB Group.