Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

wd800bb-00fja0..the dcm is:HSBACTJCA

May 16th, 2007, 9:26

Need rom file of wd800bb-00fja0..the dcm of hdd is:HSBACTJCA

May 16th, 2007, 12:13

Got 00FRA0 if that helps?

Sean

Same problem on my WD800BB-00FJA0 DCM ESBACTJCH

May 17th, 2007, 17:33

I think I have the same problem with my drive.
WD800BB-00FJA0 DCM ESBACTJCH
After a few clicks, the bios recognizes the drive's rom alias only.

I will try to buy an identical drive somewhere.

How do you copy the drive firmware ROM from a good drive to a bad drive?

Joe

programmer

May 17th, 2007, 17:45

i do that by programmer support the rom chip the file was 128kb so program it to chip(rom) or u can do that bu pc3000 v2.27 pci for windows

May 17th, 2007, 18:00

I do not have PC3000. Do you have link to software to R/W hdd ROM?

there is no software except salvation data

May 17th, 2007, 18:55

there is no software except salvation data (hdd doctor )but i havenot so try to do that by universal programmer
Post a reply