SP0802N REV D

HI TO ALL.

MHDD REPORT FOR HDD

F8 OK
F2 OK

F4= SCAN ERRORS

AAAAAAAA (LBA 0) LBA 63) many errors!!!

IT HAS REGIONS IN THE HDD THAT GOOD
EXAMPLE: LBA 73 100 000 EVEN 79 343 000

What I CAN MAKE TO RECOVERY The DATA?

Problem SA? :?:

thanks for helps..

I would try to read the good sectors to another hdd (previously zeroed) and then run some recovery software in raw mode to recover the files. I have used ddrescue (available in the boot cd RIP linux) to do that with good results. That's just my 2 cents, I'm not an expert. I'm sure someone with more knowledge could give you better advice.

There is a problem with this model. it suddenly became like this. It is very difficult to recover data from this hard disk.

DF

Hi,

The problem is probably with one head. Check the periodicity of the bad/good areas, if it is ~3000000 LBAs, it is surely head problem.
It can even be that in the beginning there is a larger area, but it can be head problem even then.

regards,
pepe