TOSHIBA MK40004GAH

[beto]

Does anyone know where get a screw driver for this screw on Toshiba 1.8" GAH

its draw like a STAR
Thanks

[Real_Jose_Pinto]

i once tried to get from wiha.com but they hassled me too much by asking me to write a letter confirming what i will do with it, because its a security torx plus bit. Having done that they told me they cannot export this product outside US. What a dick head!

Finally i made my own from normal torx bit.

[dobrevjetser]

They are normally included in sets to work on mobile phones.
I ordered one from Germany via Ebay.

Regards,

Dobre

[pcimage]

Last time I opened one of these, I used a T5.

If you're careful and push down quite hard while turning slowly, they will come undone.

Sean

[beto]

i cant get the tool for this kind of screw but thanks God and your comments i be able to adapt one of mine for open it this 1.8" HDD , then inside a Head Sticktion after do the need it task´s !! Get all Data



Thanks a lot of to all people on hddguru GOD bless u

Sinceraly

Alberto

[pcimage]

Yep, Alberto.

I had stiction too.

99% fixed with my method!!

[AWAaron]

Yep, Alberto.

I had stiction too.

99% fixed with my method!!

[pcimage]

Yep, Alberto.

I had stiction too.

99% fixed with my method!!

You have PM

[STeALtH]

They are normally included in sets to work on mobile phones.
I ordered one from Germany via Ebay.

Can get the torx star security bits in Amazon too & the mob phone kits, pretty cheap depending on make and size.

Eg: http://www.amazon.co.uk/Draper-38716-33 ... 325&sr=8-1

S

[loki]

I bought this from ebay

http://www.ebay.co.uk/itm/5-Point-Penta ... 2c5e1e0146