Board for WD360GD-00FLA2 ?
July 2nd, 2007, 21:43
EDIT: I am NOT a data lab technician. I am just a home user who wants to recover his hard drive. 
My Western Digital Raptor SATA 36GB 10k RPM no longer works, and I would like to try replacing the controller board.
Any suggestions would be welcome.
---------------------------------------------
My HDD got too hot due to my own failure. One of the little pieces on the controller board looks all burnt.
The drive is not recognized by the bios, and I assume it is no longer getting power, as I can not detect any vibration or noise.
I would like to buy an identical drive to swap out the controller board, but my exact model isn't made anymore.
Existing drive model number:
MDL: WD360GD-00FLA2
Date: 11 MAY 2005
DCM: HBCAJAB
I do see drives available that are WD360GD, but lack the "-00FLA2".
Where might I find a replacement board or donor drive?
Do the full model numbers AND DCM have to be exactly the same?
My Western Digital Raptor SATA 36GB 10k RPM no longer works, and I would like to try replacing the controller board.
Any suggestions would be welcome.
---------------------------------------------
My HDD got too hot due to my own failure. One of the little pieces on the controller board looks all burnt.
The drive is not recognized by the bios, and I assume it is no longer getting power, as I can not detect any vibration or noise.
I would like to buy an identical drive to swap out the controller board, but my exact model isn't made anymore.
Existing drive model number:
MDL: WD360GD-00FLA2
Date: 11 MAY 2005
DCM: HBCAJAB
I do see drives available that are WD360GD, but lack the "-00FLA2".
Where might I find a replacement board or donor drive?
Do the full model numbers AND DCM have to be exactly the same?
Powered by phpBB © phpBB Group.