Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Seagate 7200.10 problem

July 18th, 2007, 3:29

Hello,

I have Seagate 7200.10 80GB; here is the terminal log, it cannot go to T> level
how to get to T> or F> levels ?

Thank you.
-----------------------------------------------------------------------

Reset
1024k x 16 DRAM
NHAWK - 1_Disk S-41 10-23-06_16:40

Buzz
Buzz
Buzz

Re: Seagate 7200.10 problem

July 18th, 2007, 4:05

Hi,
try with most powerfull PSU.

Regards
Samuil

Re: Seagate 7200.10 problem

July 18th, 2007, 16:06

Hi,

probably the spindle is seized or heads are stuck on the surface...

pepe

Re: Seagate 7200.10 problem

July 18th, 2007, 19:04

Spindle seizure is very popular on these models.

I guess the drive does not spin?

When u apply power, hold the drive in your hand. If you can feel slight movements, then it's more likely stiction, which is 100x easier to fix :-)

IMHO of course ;-)

Re: Seagate 7200.10 problem

July 19th, 2007, 5:24

pcimage, you are right..

Thanks for all answers.
Post a reply