Is there a way to manually create PLIST for N40P

[fujimax]

Have here N40P with P defects output from 33h which seems OK.
plist 18h is corrupted - FE FF FF FF 00 00 00 00.

plist copies are also corrupted.

I want to try to edit 18h plist from listing : CHS and length.

can this be done manually ?

deleted

Last edited by Guest on June 8th, 2005, 10:40, edited 1 time in total.

[Archive_vi]

Have here N40P with P defects output from 33h which seems OK.
plist 18h is corrupted - FE FF FF FF 00 00 00 00.

plist copies are also corrupted.

I want to try to edit 18h plist from listing : CHS and length.

can this be done manually ?

Yes of course. But you must know how to recalculate CRC of this module.

If you talked about AT_PDL - yes, it can be done manually.
1. This is more quick then use "other" method
2. This is not a big challenges.

2Diogen: PC3k can fix CRC

[fujimax]

If you talked about AT_PDL - yes, it can be done manually.
1. This is more quick then use "other" method
2. This is not a big challenges.

Sometimes I don't trust these click programs, especially the regen.

Ah any help with structure of AT_PDL to manually edit it - I will be grateful.

Also offset 84h in Disk module - how to establish this when this module and the copy are BAD!

soory for the many questions