Samsung SP0802N D-list /S-list Problems
October 13th, 2007, 3:10
Hi
Guys i have one 80Gb samsung sp0802N for Data Recovery. Its making clicking noise. I found problems with D-list /S-list.
here is log of the drive -
Family selected: PUMA
Model................................... : SP0802N
Technological ID
Flash version........................... :
Heads number............................ : 1
SA SPT.................................. : 800
Modules table used by default
Service Area
Head map................................ : Module header errorSerial Number........................... : BBPES1 ¾
USER password........................... : No
Module header of BISPT.................. : Module header error Read ROM via terminal
Into folder............................. : <HDD Profile>\Data\ROM
ROM reading in progress...
Checksum verification
Ok
Completed
Reading modules
Into folder............................. : <HDD Profile>\Data\Modules
IDFY.................................... : OK
SKEW.................................... : OK
BRSLT................................... : OK
BTIME................................... : OK
RCOHDR.................................. : OK
RCO_LOG................................. : OK
BISPT................................... : OK
SNTBL................................... : OK
CRITERIA................................ : OK
SECURITY................................ : OK
DLIST................................... : Read sector error (c: 5,h:0,s: 256) (INF)ALIST................................... : OK
VLISTHDR................................ : OK
VLIST................................... : OK
SLISTHDR................................ : OK
SLIST................................... : Read sector error (c: 0,h:0,s: 512) (INF)MLIST................................... : OKARCOTBL................................. : OK
ARCOTBL2................................ : OK
MRTUNEMT................................ : Read sector error (c: 0,h:0,s: 256) (INF)TMPRTR.................................. : OK
SRVTBL.................................. : OK
SRVTBL2................................. : OK
LATCHFRC................................ : OK
PARAM................................... : OK
FINALTST................................ : OK
TLIST................................... : OK
SMART................................... : OK
PRML.................................... : OK
SMTBL................................... : OK
UNITABLE................................ : OK
ERRTRK.................................. : OK
ERRZN................................... : OK
ERRDRV.................................. : OK
SETMAX.................................. : OK
SRTDATA................................. : OK
SRTSRVO................................. : OK
ELOG.................................... : Read sector error (c: 1,h:0,s: 256) (INF)D_CSM................................... : OKGAIN.................................... : OK
WB_LOG.................................. : OK
ATW_LOG................................. : OK
Test completed
SA structure test
Reading modules...
IDFY.................................... : OK
SKEW.................................... : OK
BRSLT................................... : OK
BTIME................................... : OK
RCOHDR.................................. : OK
RCO_LOG................................. : OK
BISPT................................... : OK
SNTBL................................... : OK
CRITERIA................................ : OK
SECURITY................................ : OK
DLIST................................... : Read sector error (c: 5,h:0,s: 256) (INF)ALIST................................... : OKVLISTHDR................................ : OK
VLIST................................... : OK
SLISTHDR................................ : OK
SLIST................................... : Read sector error (c: 0,h:0,s: 512) (INF)MLIST................................... : OKARCOTBL................................. : OK
ARCOTBL2................................ : OK
MRTUNEMT................................ : Read sector error (c: 0,h:0,s: 256) (INF)TMPRTR.................................. : OK
SRVTBL.................................. : OK
SRVTBL2................................. : OK
LATCHFRC................................ : OK
PARAM................................... : OK
FINALTST................................ : OK
TLIST................................... : OK
SMART................................... : OK
PRML.................................... : OK
SMTBL................................... : OK
UNITABLE................................ : OK
ERRTRK.................................. : OK
ERRZN................................... : OK
ERRDRV.................................. : OK
SETMAX.................................. : OK
SRTDATA................................. : OK
SRTSRVO................................. : OK
ELOG.................................... : Read sector error (c: 1,h:0,s: 256) (INF)D_CSM................................... : OK
GAIN.................................... : OK
WB_LOG.................................. : OK
ATW_LOG................................. : OK
Password information.................... : Loaded
S-LIST.................................. : Module header error
T-LIST.................................. : Module header error
A-LIST.................................. : Module header error
D-LIST.................................. : Module header error
Test completed
Terminal Log is -
HErr! 1710
HErr! 1710
HErr! 1710
HErr! 1710
HErr! 1710
HErr! 1710
HErr! 1710
HErr! 1710
SA Structure -
SA STRUCTURE
SA parameters
Zone #.................................. : 0
Initial cylinder........................ : -6
Final cylinder.......................... : 0
SPT..................................... : 800
ZONE TABLE
Number of zones......................... : 0
-------------------------------------------------------------
# : Initial cylinder : Final cylinder : SPT
-------------------------------------------------------------
------------------------------------------------------------
MODULES TABLE
--------------------------------------------------------------------------------------------
Module : Cyl : Head : Sec : Length : Read : CrLev : Real Header : Standard Hdr :
--------------------------------------------------------------------------------------------
IDFY : 0 : 0 : 1 : 1 : OK : D : :
SKEW : 0 : 0 : 2 : 1 : OK : : :
BRSLT : 0 : 0 : 10 : 1 : OK : Dr : :
BTIME : 0 : 0 : 170 : 1 : OK : : : BURNTIME
RCOHDR : 2 : 0 : 1 : 2 : OK : : €A ü€A : RCOHDR
RCO_LOG : 2 : 0 : 6 : 200 : OK : : €Aû €Aô : RCODATA
BISPT : 0 : 0 : 5 : 4 : OK : Dr : :
SNTBL : 0 : 0 : 3 : 2 : OK : : :
CRITERIA : 0 : 0 : 11 : 1 : OK : : SEEKTIME : CRITERIA
SECURITY : 0 : 0 : 234 : 1 : OK : C : : SECURI
DLIST : 5 : 0 : 1 : 256 : Err : Dd : : DEFECT
ALIST : 0 : 0 : 66 : 5 : OK : Ad : : (REAS)
VLISTHDR : 0 : 0 : 299 : 1 : OK : As : : [SRVO]
VLIST : 0 : 0 : 300 : 16 : OK : Ad : :
SLISTHDR : 0 : 0 : 400 : 1 : OK : As : : <SLIP>
SLIST : 0 : 0 : 401 : 128 : Err : Ad : :
MLIST : -6 : 0 : 1 : 1 : OK : As : : M_DFCT
ARCOTBL : 0 : 0 : 80 : 8 : OK : : : ARCO
ARCOTBL2 : 0 : 0 : 171 : 8 : OK : : : ARCO
MRTUNEMT : 0 : 0 : 251 : 24 : Err : As : : MRTUNEMT
TMPRTR : 0 : 0 : 790 : 1 : OK : : : CAL_TEMP
SRVTBL : -6 : 0 : 32 : 3 : OK : : : SS
SRVTBL2 : 0 : 0 : 189 : 3 : OK : : : SS
LATCHFRC : 0 : 0 : 205 : 1 : OK : : : SL
PARAM : 0 : 0 : 696 : 10 : OK : : :
FINALTST : 0 : 0 : 12 : 8 : OK : : :
TLIST : 0 : 0 : 30 : 2 : OK : Ad : : TRACKS
SMART : 0 : 0 : 90 : 6 : OK : : : SMARTMEM
PRML : 0 : 0 : 181 : 8 : OK : : :
SMTBL : 0 : 0 : 192 : 1 : OK : : : SM
UNITABLE : 0 : 0 : 197 : 2 : OK : As : : UNITABLE
ERRTRK : 0 : 0 : 217 : 1 : OK : : : ERATETST
ERRZN : 0 : 0 : 218 : 1 : OK : : : ERATETST
ERRDRV : 0 : 0 : 219 : 1 : OK : : : ERATETST
SETMAX : 0 : 0 : 233 : 1 : OK : : : SETMAX
SRTDATA : 0 : 0 : 280 : 1 : OK : : :
SRTSRVO : 0 : 0 : 281 : 1 : OK : : : SDF_CNT
ELOG : 1 : 0 : 1 : 792 : Err : Dr : :
D_CSM : 3 : 0 : 2 : 252 : OK : : :
GAIN : 0 : 0 : 691 : 1 : OK : : : GAIN
WB_LOG : 0 : 0 : 692 : 2 : OK : : : WB_LOG
ATW_LOG : 0 : 0 : 694 : 1 : OK : : : ATW_RTL
--------------------------------------------------------------------------------------------
HDD SECURITY SUBSYSTEM
-----------------------------------------------------------------------------
MASTER password......................... :
USER password........................... :
Master Code............................. : 0000
USER password is set.................... : No
Security level.......................... : High
-----------------------------------------------------------------------------
LIST NOT LOADED
LIST NOT LOADED
LIST NOT LOADED
LIST NOT LOADED
In DE i can see logical structure but get read errors .Is this because of bad sectors in SA area? . What would be the best
plan to recover data.
Any help Suggestion needed.
Thanks
hddbug
Guys i have one 80Gb samsung sp0802N for Data Recovery. Its making clicking noise. I found problems with D-list /S-list.
here is log of the drive -
Family selected: PUMA
Model................................... : SP0802N
Technological ID
Flash version........................... :
Heads number............................ : 1
SA SPT.................................. : 800
Modules table used by default
Service Area
Head map................................ : Module header errorSerial Number........................... : BBPES1 ¾
USER password........................... : No
Module header of BISPT.................. : Module header error Read ROM via terminal
Into folder............................. : <HDD Profile>\Data\ROM
ROM reading in progress...
Checksum verification
Ok
Completed
Reading modules
Into folder............................. : <HDD Profile>\Data\Modules
IDFY.................................... : OK
SKEW.................................... : OK
BRSLT................................... : OK
BTIME................................... : OK
RCOHDR.................................. : OK
RCO_LOG................................. : OK
BISPT................................... : OK
SNTBL................................... : OK
CRITERIA................................ : OK
SECURITY................................ : OK
DLIST................................... : Read sector error (c: 5,h:0,s: 256) (INF)ALIST................................... : OK
VLISTHDR................................ : OK
VLIST................................... : OK
SLISTHDR................................ : OK
SLIST................................... : Read sector error (c: 0,h:0,s: 512) (INF)MLIST................................... : OKARCOTBL................................. : OK
ARCOTBL2................................ : OK
MRTUNEMT................................ : Read sector error (c: 0,h:0,s: 256) (INF)TMPRTR.................................. : OK
SRVTBL.................................. : OK
SRVTBL2................................. : OK
LATCHFRC................................ : OK
PARAM................................... : OK
FINALTST................................ : OK
TLIST................................... : OK
SMART................................... : OK
PRML.................................... : OK
SMTBL................................... : OK
UNITABLE................................ : OK
ERRTRK.................................. : OK
ERRZN................................... : OK
ERRDRV.................................. : OK
SETMAX.................................. : OK
SRTDATA................................. : OK
SRTSRVO................................. : OK
ELOG.................................... : Read sector error (c: 1,h:0,s: 256) (INF)D_CSM................................... : OKGAIN.................................... : OK
WB_LOG.................................. : OK
ATW_LOG................................. : OK
Test completed
SA structure test
Reading modules...
IDFY.................................... : OK
SKEW.................................... : OK
BRSLT................................... : OK
BTIME................................... : OK
RCOHDR.................................. : OK
RCO_LOG................................. : OK
BISPT................................... : OK
SNTBL................................... : OK
CRITERIA................................ : OK
SECURITY................................ : OK
DLIST................................... : Read sector error (c: 5,h:0,s: 256) (INF)ALIST................................... : OKVLISTHDR................................ : OK
VLIST................................... : OK
SLISTHDR................................ : OK
SLIST................................... : Read sector error (c: 0,h:0,s: 512) (INF)MLIST................................... : OKARCOTBL................................. : OK
ARCOTBL2................................ : OK
MRTUNEMT................................ : Read sector error (c: 0,h:0,s: 256) (INF)TMPRTR.................................. : OK
SRVTBL.................................. : OK
SRVTBL2................................. : OK
LATCHFRC................................ : OK
PARAM................................... : OK
FINALTST................................ : OK
TLIST................................... : OK
SMART................................... : OK
PRML.................................... : OK
SMTBL................................... : OK
UNITABLE................................ : OK
ERRTRK.................................. : OK
ERRZN................................... : OK
ERRDRV.................................. : OK
SETMAX.................................. : OK
SRTDATA................................. : OK
SRTSRVO................................. : OK
ELOG.................................... : Read sector error (c: 1,h:0,s: 256) (INF)D_CSM................................... : OK
GAIN.................................... : OK
WB_LOG.................................. : OK
ATW_LOG................................. : OK
Password information.................... : Loaded
S-LIST.................................. : Module header error
T-LIST.................................. : Module header error
A-LIST.................................. : Module header error
D-LIST.................................. : Module header error
Test completed
Terminal Log is -
HErr! 1710
HErr! 1710
HErr! 1710
HErr! 1710
HErr! 1710
HErr! 1710
HErr! 1710
HErr! 1710
SA Structure -
SA STRUCTURE
SA parameters
Zone #.................................. : 0
Initial cylinder........................ : -6
Final cylinder.......................... : 0
SPT..................................... : 800
ZONE TABLE
Number of zones......................... : 0
-------------------------------------------------------------
# : Initial cylinder : Final cylinder : SPT
-------------------------------------------------------------
------------------------------------------------------------
MODULES TABLE
--------------------------------------------------------------------------------------------
Module : Cyl : Head : Sec : Length : Read : CrLev : Real Header : Standard Hdr :
--------------------------------------------------------------------------------------------
IDFY : 0 : 0 : 1 : 1 : OK : D : :
SKEW : 0 : 0 : 2 : 1 : OK : : :
BRSLT : 0 : 0 : 10 : 1 : OK : Dr : :
BTIME : 0 : 0 : 170 : 1 : OK : : : BURNTIME
RCOHDR : 2 : 0 : 1 : 2 : OK : : €A ü€A : RCOHDR
RCO_LOG : 2 : 0 : 6 : 200 : OK : : €Aû €Aô : RCODATA
BISPT : 0 : 0 : 5 : 4 : OK : Dr : :
SNTBL : 0 : 0 : 3 : 2 : OK : : :
CRITERIA : 0 : 0 : 11 : 1 : OK : : SEEKTIME : CRITERIA
SECURITY : 0 : 0 : 234 : 1 : OK : C : : SECURI
DLIST : 5 : 0 : 1 : 256 : Err : Dd : : DEFECT
ALIST : 0 : 0 : 66 : 5 : OK : Ad : : (REAS)
VLISTHDR : 0 : 0 : 299 : 1 : OK : As : : [SRVO]
VLIST : 0 : 0 : 300 : 16 : OK : Ad : :
SLISTHDR : 0 : 0 : 400 : 1 : OK : As : : <SLIP>
SLIST : 0 : 0 : 401 : 128 : Err : Ad : :
MLIST : -6 : 0 : 1 : 1 : OK : As : : M_DFCT
ARCOTBL : 0 : 0 : 80 : 8 : OK : : : ARCO
ARCOTBL2 : 0 : 0 : 171 : 8 : OK : : : ARCO
MRTUNEMT : 0 : 0 : 251 : 24 : Err : As : : MRTUNEMT
TMPRTR : 0 : 0 : 790 : 1 : OK : : : CAL_TEMP
SRVTBL : -6 : 0 : 32 : 3 : OK : : : SS
SRVTBL2 : 0 : 0 : 189 : 3 : OK : : : SS
LATCHFRC : 0 : 0 : 205 : 1 : OK : : : SL
PARAM : 0 : 0 : 696 : 10 : OK : : :
FINALTST : 0 : 0 : 12 : 8 : OK : : :
TLIST : 0 : 0 : 30 : 2 : OK : Ad : : TRACKS
SMART : 0 : 0 : 90 : 6 : OK : : : SMARTMEM
PRML : 0 : 0 : 181 : 8 : OK : : :
SMTBL : 0 : 0 : 192 : 1 : OK : : : SM
UNITABLE : 0 : 0 : 197 : 2 : OK : As : : UNITABLE
ERRTRK : 0 : 0 : 217 : 1 : OK : : : ERATETST
ERRZN : 0 : 0 : 218 : 1 : OK : : : ERATETST
ERRDRV : 0 : 0 : 219 : 1 : OK : : : ERATETST
SETMAX : 0 : 0 : 233 : 1 : OK : : : SETMAX
SRTDATA : 0 : 0 : 280 : 1 : OK : : :
SRTSRVO : 0 : 0 : 281 : 1 : OK : : : SDF_CNT
ELOG : 1 : 0 : 1 : 792 : Err : Dr : :
D_CSM : 3 : 0 : 2 : 252 : OK : : :
GAIN : 0 : 0 : 691 : 1 : OK : : : GAIN
WB_LOG : 0 : 0 : 692 : 2 : OK : : : WB_LOG
ATW_LOG : 0 : 0 : 694 : 1 : OK : : : ATW_RTL
--------------------------------------------------------------------------------------------
HDD SECURITY SUBSYSTEM
-----------------------------------------------------------------------------
MASTER password......................... :
USER password........................... :
Master Code............................. : 0000
USER password is set.................... : No
Security level.......................... : High
-----------------------------------------------------------------------------
LIST NOT LOADED
LIST NOT LOADED
LIST NOT LOADED
LIST NOT LOADED
In DE i can see logical structure but get read errors .Is this because of bad sectors in SA area? . What would be the best
plan to recover data.
Any help Suggestion needed.
Thanks
hddbug
Re: Samsung SP0802N D-list /S-list Problems
October 13th, 2007, 7:06
Hi Hddbug,
I've got a similar case. Many modules corrupt.
However, if you read them with the utility, you can use composite read and most modules can be recoverd. I'm going to use hotswap to get the data.
Just waiting for the donor-drive to arrive.
I think this will also be the best option for you.
Best reagards,
Dobre
I've got a similar case. Many modules corrupt.
However, if you read them with the utility, you can use composite read and most modules can be recoverd. I'm going to use hotswap to get the data.
Just waiting for the donor-drive to arrive.
I think this will also be the best option for you.
Best reagards,
Dobre
Re: Samsung SP0802N D-list /S-list Problems
October 13th, 2007, 8:25
did u tried to read these modules from head #2.
DF
DF
Re: Samsung SP0802N D-list /S-list Problems
October 13th, 2007, 12:38
dobrevjetser wrote:Hi Hddbug,
I've got a similar case. Many modules corrupt.
However, if you read them with the utility, you can use composite read and most modules can be recoverd. I'm going to use hotswap to get the data.
Just waiting for the donor-drive to arrive.
I think this will also be the best option for you.
Best reagards,
Dobre
Hi Dobre
Thanks for your help. I will try composite read.I am eager to know your hotswap method.Wish You All the Best.
Best Regards
Hddbug
Re: Samsung SP0802N D-list /S-list Problems
October 13th, 2007, 12:40
darkforce1 wrote:did u tried to read these modules from head #2.
DF
Hi Darforce
Thanks i will try reading using Head 2 and will report .
Best Regards
hddbug
Re: Samsung SP0802N D-list /S-list Problems
May 18th, 2015, 7:36
Hello
Can one still recover the Data if both the S-LIST and T-LIST is damaged.
Though PC-3000 can REBUILD both but to Rebuild one other has to be good.
No clue what to do in case both are damaged.
Any Suggestions ????
Can one still recover the Data if both the S-LIST and T-LIST is damaged.
Though PC-3000 can REBUILD both but to Rebuild one other has to be good.
No clue what to do in case both are damaged.
Any Suggestions ????
Re: Samsung SP0802N D-list /S-list Problems
May 18th, 2015, 8:07
hddbug wrote:Hi
Guys i have one 80Gb samsung sp0802N for Data Recovery. Its making clicking noise. I found problems with D-list /S-list.
here is log of the drive -
Family selected: PUMA
Model................................... : SP0802N
Technological ID
Flash version........................... :
Heads number............................ : 1
SA SPT.................................. : 800
Modules table used by default
....
You had select wrong family. Use PALO family.
darkforce1 wrote:did u tried to read these modules from head #2.
DF
There is no Head 2, drive has only two heads in normal configuration, 0 and 1.
Re: Samsung SP0802N D-list /S-list Problems
May 18th, 2015, 8:14
@ Suitsof, you are replying to a thread from almost a decade ago
Re: Samsung SP0802N D-list /S-list Problems
May 18th, 2015, 9:04
))) Yes, I'm lost in the time..
Re: Samsung SP0802N D-list /S-list Problems
May 19th, 2015, 0:38
Can the data still recoverable if both the S-LIST and T-LIST is damaged in SAMSUNG SP0822N RUBICON Family ?
Re: Samsung SP0802N D-list /S-list Problems
May 19th, 2015, 3:19
Yes, recoverable.
Re: Samsung SP0802N D-list /S-list Problems
May 21st, 2015, 9:06
Suitsof would you mind sharing the solution for the above specified problem
Thanks
Thanks
Re: Samsung SP0802N D-list /S-list Problems
May 23rd, 2015, 1:11
Any suggestion to above post ?
Re: Samsung SP0802N D-list /S-list Problems
May 23rd, 2015, 2:10
ROb wrote:Suitsof would you mind sharing the solution for the above specified problem
Thanks
+1
Re: Samsung SP0802N D-list /S-list Problems
May 23rd, 2015, 14:30
ROb wrote:Can the data still recoverable if both the S-LIST and T-LIST is damaged in SAMSUNG SP0822N RUBICON Family ?
I have no "automatic" solution, only manually. Both lists (S- T- list) can be fixed using D-list. It's need to deep understand what are you doing.
Re: Samsung SP0802N D-list /S-list Problems
September 1st, 2018, 10:39
Can someone tell me what SLIST, ALIST and WRO LIST are and how does it affect the translator?
Re: Samsung SP0802N D-list /S-list Problems
September 1st, 2018, 17:30
It's for a different model (HD103UJ), but hopefully it will still be of some use.
Analysis of Samsung defect lists:
http://www.hddoracle.com/viewtopic.php?f=59&t=2349
Analysis of Samsung defect lists:
http://www.hddoracle.com/viewtopic.php?f=59&t=2349
Re: Samsung SP0802N D-list /S-list Problems
September 1st, 2018, 17:47
Thanks again
Re: Samsung SP0802N D-list /S-list Problems
September 1st, 2018, 18:03
mhp666 wrote:Thanks again
If you would like to analyse your own SP0802N drive, I would be interested in collaborating with you.
I have a few ideas which might prove useful, such as truncating various SA (MC) modules.
For example, ISTM that the size of the DLIST module could be reduced to just a few sectors instead of the 0x284 sectors allocated to it. Similarly, MOVLY001 could be reduced to 0x34 sectors instead of 0x18C.
Re: Samsung SP0802N D-list /S-list Problems
September 1st, 2018, 18:25
I'm starting to study SAMSUNG.
I have posted this message here because I am looking for information because I have almost nothing. I'm looking for information little by little.
I'm doing tests with this disk.
I will see what options the MRTLAB allows me.
The HDD has bad sectors, but it works.
If I erase all the SA can it be recovered?
The MRTLAB says it has 255 SA tracks, but it reads well from 0 .. 63 and then it gives read errors. I'm thinking that the SA is on the first 64 tracks.
I have posted this message here because I am looking for information because I have almost nothing. I'm looking for information little by little.
I'm doing tests with this disk.
- Code:
Family: M7E 2.5''
Model:SAMSUNG HM321HI
Technology mode key : .....................: OK
Extend disk identify:
Load extend diskIdentify : ................: OK
Flash Version : ...........................: 2AJ03jkM.d31
Heads Number : ............................: 2
SA SPT : ..................................: 1088
I will see what options the MRTLAB allows me.
The HDD has bad sectors, but it works.
If I erase all the SA can it be recovered?
The MRTLAB says it has 255 SA tracks, but it reads well from 0 .. 63 and then it gives read errors. I'm thinking that the SA is on the first 64 tracks.
Powered by phpBB © phpBB Group.