WD scorpio WDBEVS 120 GB SATA detected as 0mb

[hddbug]

Hi Friends
This particular hard disk a WD 2.5" is been fallen and afterwards in bios model name does not appear with its size 0 mb. I tried reverse clone with media tools but it is nor detected by mediatools , any help / Suggestions welcome , Thank you
Hddbug

[sempre]

Hi!

it uses mhdd and it speaks as it recognizes hdd, verifies if it is not with hpa activated!

I wait to have helped!

[hddbug]

Hi sempre
Thanks for your reply. I checked for HPA , it is not having HPA enabled.