Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
February 21st, 2008, 12:00
As we known when a maxtor hdd spin up with noise maybe firmware or head damage, sometimes distinguish them is hardly so i made some loaders for every head of calypso hdd. you can use those loaders load every head, if hdd show ready then "maybe" this head is good one. but this is an easy way not a final way.
more times we have to change head in clean room for check good or not.
files link:
http://files.hddguru.com/download/PC-30 ... %20LDR.rarfiles contain 6 loaders(head 0-5) for calypso with check sum 3619.
good luck
wawalab
February 26th, 2008, 15:38
good share !!
Powered by phpBB © phpBB Group.