Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

SAMSUNG SP1654N after Zero-Fill HDD won't work

March 7th, 2008, 9:29

Hey

I filled my hdd with zeros, it hanged... i restarted my pc
and my hdd is now dead :(
No known utility won't work... it shows my drive in bios and utilites,
mark & s/n are all ok, but i can't make any patritions and if i scan for errors
then all sectors are BAD :(

IS my drive realy dead or something can make it useble again?

Thax

Re: SAMSUNG SP1654N after Zero-Fill HDD won't work

March 7th, 2008, 11:15

A real silly question, forgive me if it's too obvious. Was this your boot drive?

If not, can you try again filling with zeros?

Re: SAMSUNG SP1654N after Zero-Fill HDD won't work

March 7th, 2008, 11:47

it can't fill with zeros anymore... only what this drive does
is low level format with samsung utility... and in the end it gives a
error... if i run seatools or any utility for check errors, then all sectors are BAD...

Like the heads are damaged... or i don't no what anymore :(

Re: SAMSUNG SP1654N after Zero-Fill HDD won't work

March 7th, 2008, 12:16

Drive Fitness Test say's:
Device is Password prodected and can not tested.

I have test almoust every utility on UBCD 4.11.

Re: SAMSUNG SP1654N after Zero-Fill HDD won't work

March 7th, 2008, 15:58

Hi What Utility did You Use .

initially

Re: SAMSUNG SP1654N after Zero-Fill HDD won't work

March 10th, 2008, 3:18

Hi

I used Active KillDisk Free Edition v4.1 on the ubcd.
It hanged and after that i can't do anything with my disk.
No known utility won't work :(

Re: SAMSUNG SP1654N after Zero-Fill HDD won't work

March 10th, 2008, 3:43

Try Active Killdisk again Cos it Might Be Password Protecting the HDD Before Doing Zerofilling ,

Re: SAMSUNG SP1654N after Zero-Fill HDD won't work

March 10th, 2008, 3:47

Hi try HDD password removal tool in dos to remove password.

Thanks.

Re: SAMSUNG SP1654N after Zero-Fill HDD won't work

March 10th, 2008, 4:27

Sadiq ,
What If He Does Not Remember it ?

Re: SAMSUNG SP1654N after Zero-Fill HDD won't work

March 10th, 2008, 4:58

i have'nt put any passwords... and atapwd can't put or erase any passwords and gives a error :(

Re: SAMSUNG SP1654N after Zero-Fill HDD won't work

March 10th, 2008, 4:58

Amarbir wrote:Try Active Killdisk again Cos it Might Be Password Protecting the HDD Before Doing Zerofilling ,


active killdisk won't see my drive.

Re: SAMSUNG SP1654N after Zero-Fill HDD won't work

March 10th, 2008, 9:18

i just used samsung sutil's and it say's DRQ timeout, when i wanted to to Entire_erase???

Re: SAMSUNG SP1654N after Zero-Fill HDD won't work

March 10th, 2008, 11:51

mhdd says it is password prodected, but can not remove :(
but i found a programm called a-ff repair station, it say's it is
prodected with password and it can be removed with this programm, but it costs :(

Re: SAMSUNG SP1654N after Zero-Fill HDD won't work

March 11th, 2008, 0:52

Hi try this program in dos ATAPWD 1.2
Hard Disk Password Utility you can remove the password.i hope it gets resolved.

Re: SAMSUNG SP1654N after Zero-Fill HDD won't work

March 11th, 2008, 3:27

sadiq005 wrote:Hi try this program in dos ATAPWD 1.2
Hard Disk Password Utility you can remove the password.i hope it gets resolved.


HI

Atapwd says Command rejected by drive????
Has someone used a-ff repair station... does it work???

Re: SAMSUNG SP1654N after Zero-Fill HDD won't work

March 11th, 2008, 7:33

Hi, i don't know about Aff-repair i have tried ATApwd it got resolved.

Thanks.

Re: SAMSUNG SP1654N after Zero-Fill HDD won't work

March 12th, 2008, 6:21

Anybody??? pleazzz.

Re: SAMSUNG SP1654N after Zero-Fill HDD won't work

March 13th, 2008, 10:06

A cheaper alternative to A-FF Repair Station would be HDD Unlock Wizard: http://hddunlock.com

Re: SAMSUNG SP1654N after Zero-Fill HDD won't work

March 14th, 2008, 5:02

maysoft wrote:A cheaper alternative to A-FF Repair Station would be HDD Unlock Wizard: http://hddunlock.com


Has someone used it?
What means DRQ timeout? is'nt it a real hardware error?

Thax
Post a reply