Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Hi have anyone used these hardware kits?

October 11th, 2005, 2:07

hi guys,kindly v a look at these three sites and tell me if u v any information about thier seriuocity

http://www.pctestpro.com/disktest/king_kesender.htm

http://www.acelab.ru/products/pc-en/

http://www.pc3khrt.com/hrt.htm

thanx in advance

Samady

Cracks

October 11th, 2005, 11:36

http://www.pc3khrt.com/hrt.htm looks like crack of the original products. We should neither purchase them nor let others to know about them.

what do you think ????????

October 12th, 2005, 23:48

I think gurudev is right about this site being a crack but I think also every one must be told 'cos they have a very good position in the search engine ranking which means this site (chinese I think) may hit too many of us.

But what about the other 2 sites thier tools seems to b very attractive

October 14th, 2005, 18:45

why acelab do not provide prices ?

October 15th, 2005, 7:31

hi,

they provide, just have to ask...

pepe

October 15th, 2005, 21:35

i have asked them twice - no answer in 3 months :(

October 17th, 2005, 0:53

1st for yoyo
they provide price but need some time it took me 3 weeks to get thier answer as it seems they target every country with the suitable strategy they even may offer you some ideas to expand your business.

2nd about http://www.pc3khrt.com/hrt.htm It's now valid
that they are a hack of the original product and here a copy of the response of ACElabs

Dear Sam!
It is a site of fakes of our equipment. Now we solve the problem on
arrest of the given manufacturers. Embassy of China in Russia promised
to solve the given question in the near future. While we warn all our
users and potential clients of danger of use by similar products!

Best regards,
Alex Derkunsky.


آû ïèٌàëè 11 îêٍےلًے 2005 م., 9:23:26:



sizc> Dear ACE Labs

sizc> Is this site related to http://www.pc3khrt.com/hrt.htm

sizc> Regards

sizc>

sizc> Sam





--
ر َâàوهيèهى,
ہëهêٌàينً mailto:pc@acelab.ru

October 20th, 2005, 16:55

We've had problems with them spamming their sites on several of our forums - we delete their accounts, but they keep coming back. Heck, they not only pirated the hardware/software - they even stole the images from ace, complete with watermarks!

October 20th, 2005, 20:40

RoboGeek wrote:We've had problems with them spamming their sites on several of our forums - we delete their accounts, but they keep coming back. Heck, they not only pirated the hardware/software - they even stole the images from ace, complete with watermarks!


Very true! I would probably give them the credit if they could properly hack the product. What they do is advertize that they are providing customers with technical support, firmware database, etc etc etc. Once you buy this shit from them - they are gone... you call, send emails - no responce... Busy cheating other people.
All they do is sell this shitty product to people that are looking for a cheap solution... and what these people get in return? - a complete abortion and not the product that functions. So, "greedy pays twice" kinda thing....
Chinese did not hack PC-3000 properly and will never crack it properly. They got to the point where PC-3000 doesn't compain about the license and think they've cracked it... however, when you install the soft and run the application - for some reason it doesn't fix your drive, even though it says - REPAIRED SUCCESSFULLY!

At this point you start scratching your head :shock: with the fork and think... what the heck is happening here? :roll: LOL! :P

October 21st, 2005, 18:07

No.. its not even close to the original. And I get alot of the "I bought this PC 3000 from China and it doesn't do what you say it does" kinda emails at least once a week.

If your curious about Mr Jacky Wong.. here's a link to one of his many posts.. where he got 0wnt with simple research techniques..

http://forums.computerrepair.com/viewto ... ght=#33161

October 22nd, 2005, 11:38

This link:
http://forums.computerrepair.com/viewto ... ght=#33161
Works ?

And who is Mr Jacky Wong.. ????????

People write things here,but does not explain.........

Also I'm a little bit stupid, and I would like to ask thsi ...
If the Chinese clone ( I do not know nothing , I'm just doing an observation after what I read here ) does not work and is bad and broke disk and all this , what we can say about the pirate copy of PC3K utils ?
they work ? don't brake disks ? do not fake the job ?, this is good ?....

Or you guys are only againt the chinese clones ?
Clones is no good but piracy is ok, is this ?
Who is the bad guys ? I think ( readding this post ) that I will live 2 twice and I will not know.

Jesus and Mary this is really hard.....

October 22nd, 2005, 12:51

The link works.. its supposed to be in the public area of the forum, so you should be able to view it. If not you might have to sign up to see the thread.

Jacky is the guy who has several of the pirate sites for PC3000 clones and software.

While just plain piracy of the idea is bad enough, making a cheap clone and reselling it as an authentic PC3000 is bad. But to be honest I don't know if he even actually has any devices at all. I know 2 techs who sent him money and never got anything in return

October 23rd, 2005, 5:58

Hello RoboGeek, thank you very much.
now I understand, and I agree with you, if he is saying that he is selling the PC3000 clone as an authentic, this is very bad.
Anyway the link does not work, did you tryed it now ?
Forbidden
You don't have permission to access /viewtopic.php on this server.


--------------------------------------------------------------------------------

Apache/1.3.22 Server at forums.computerrepair.com Port 80

This is what I'm seeing when I point to the link.

Also the link http://www.computerrepair.com is not wroking.

If you can copy what is there and write here could be very good to all people here.

October 24th, 2005, 1:17

Hi Cenahum,

for me it works properly.
I hope U can access it too.
regards,
pepe

October 24th, 2005, 14:45

dos not work for me,
nor the normal website nor the forum.
maybe they are having some kind of problems, or is my IP.
anyway i will try tomorrow.

doesn't open

October 25th, 2005, 2:14

doesn't works for me as well. It says "Error 403 ( Forbidden )" .

October 25th, 2005, 6:05

Ahhhh, after all I'm not the only one that was excluded .....
Post a reply