WD1500ADFD UNCR IDNF

[dataextractor]

I've a WD1500ADFD but in mhdd or victoria it shows WD1500BB with capacity less then 150GB. When i do scan, it starts scanning and after LBA 31744 it start showing Bad sector for the rest of the drive. Error include UNCR and IDNF. Also when i try to image it, its doing a power reset once it hit that sector. Any help would be appreciated.

Thanks

[dataextractor]

Also getting AMNF

[N.C.]

Hi,

Did you try to continue the image after this point + some MB?

It looks like if the drive hits this LBA, gives up the life....

Regards,
Janos

[dataextractor]

Imaging software freezes once it hit this LBA and reset power.

[N.C.]

Imaging software freezes once it hit this LBA and reset power.

Another smarter program?
Try to jump up to 1GB and start from there...

Janos

[harddrivespecialist]

Sounds like bad heads.

[Amarbir[CDR-Labs]]

I've a WD1500ADFD but in mhdd or victoria it shows WD1500BB with capacity less then 150GB. When i do scan, it starts scanning and after LBA 31744 it start showing Bad sector for the rest of the drive. Error include UNCR and IDNF. Also when i try to image it, its doing a power reset once it hit that sector. Any help would be appreciated.

Thanks

Hi ,
If you Have the right tools Try To Do a Firmware Check And All checks Other then the heads ,If all Ok,Or for that Matter you Get error in Sa Modules Read etc also ,Its definately a Head Issue

[dataextractor]

I've checked it with salvationdata wd doctor and i am getting error "Error loading SA Map" when trying to detect HDD in auto mode. I dont know its SPT info for manual try.

[Amarbir[CDR-Labs]]

I've checked it with salvationdata wd doctor and i am getting error "Error loading SA Map" when trying to detect HDD in auto mode. I dont know its SPT info for manual try.

Hi ,
As i Have Just the Seagate Tool and Not the Other Tools I Will Try to read and tell you ......wait for my reply in the morning .

[pcimage]

Either bad heads or damaged firmware module.

This drive is not supported by WD Doctor, hence the error.