Toshiba MK6026GAS

[acforensics]

Hi Guys,

This Toshiba hdd first did not spin up at all, no busy register - nothing. So I repaired the fuse. Now it goes busy, then all status registers go on. Anyone seen this before?

I know the adaptives are held on the processor. Am I screwed if it won't boot?

Thanks,

A

[beto]

u can unsolder ROM and put on a Donnor PCB, could be another damaged on the PCB, if u PCB doesnt has serial ROM, u need to unsolder ARM chip and soldered on donnor

Best Regards

[pcimage]

Silly question, but have you set the CS jumper on PC3000?

And tried on a regular PC?

Sean

[acforensics]

Thanks Beto and Sean. I think it was a jumper issue. I fired it up in DeepSpar and it took off.

Cheers!

A

[pcimage]

[beto]

great acforensic,

best regards