Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
July 3rd, 2008, 0:51
hi, everyone I'm newbie here
I have a problem with a lot of green, red and X box on MHDD scanning
does anybody can tell me the fastest and optimum way to destroy and removed them from my hdd?
I already use MHDD, Maxblast and powermax but the result are :
> bad sector still there
> some HDD turn to fail on BIOS
please, somebody help me???
THX
Junior
July 3rd, 2008, 16:10
Selfscan. You'll lose your data.
July 4th, 2008, 1:12
You can add the bad sectors to G-list and P-list,or depop the section. Selfscan is a good way but it is very time consuming.
July 4th, 2008, 4:01
Too much for a newbie I think...
July 4th, 2008, 8:19
hi, everyone
thx for the advice, I really apreciate that
I will try it later, if somebody out there knows other way plz tell me, ok
note : thx for blackST, I agree with you but I will try what Laura has told
July 7th, 2008, 2:22
Junior,
we have no freeware for bad sectors. Please go to our website and get one. It may help you. If you need any help, just free to contact me.
Regards
Laura
July 7th, 2008, 3:16
Junior, if you want your drive fixed you have no choice and no free tool to help, it's beyond repair of free tools. Also, this is not the right place for "warez" . Lots of "bad" mean HW problems or internal SS needed to be performed (recalculate ADs) and you can't do without specialized combo HW/SW tools (and knowledge). There's no alternate way, maybe not here. Maybe someone near you can fix your drive for a small price. Just ask.
Regards.
July 7th, 2008, 5:03
mm, good advice
ok I try it
thx all
Powered by phpBB © phpBB Group.