Read Disk I: at position X: fail after 1 attempt

[Matiw]

I have a WD 2.5 inch drive; it spins normally. HDD is recognized in Disk management, in Windows explorer it is recognized but responds very slowly. The disk has two partitions, G (System disk) and I (data disk). I am able to image G, the first 100 Gbyte without a hitch using R-Studio. But, partition I, the last 132 Gbyte, is showing the above error every 12 sectors.

What do you guruºs think is the problem ?

[bcometa]

Maybe a scratch or bad/weak head or firmware problem.

[scratchy]

sounds like a common problem, but you will need access to fw.

[lcoughey]

I think the problem is that the hard drive clearly has physical issues (firmware possibly being one of them). You should either outsource to a data recovery pro or, at the very least, try to get a full sector-by-sector clone of the drive with a program like ddrescue prior to attempting a file system recovery.

[Matiw]

Thanks gurus.

In my opinion, the fact that the unreadable sectors occur at a regular interval without exception makes a scartch quite improbable.

Scratchy,

Will Sediv will do for firmware access ?

Thanks.

sounds like a common problem, but you will need access to fw.