MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Previous topic | Next topic 
Author Message
LarrySabo
 Post subject: WD Head Alignment by Cover Position - last family/model?
PostPosted: September 9th, 2014, 8:43 
Offline

Joined: December 8th, 2010, 11:37
Posts: 738
Location: Ottawa, Canada
Can anyone tell me at what point (family/model/date) did Western Digital change the design of their drives so that head alignment is no longer dependent upon the cover position?

I have a WD2500AAKS-22B3A0 drive from 31-Aug-2008 that needs a head swap and I'm reluctant to start if it is one of the models where head alignment is lost as soon as the cover is removed.

_________________
Sabo Computer Repairs & Data Recovery
Top
 Profile  
 
jono-ats
 Post subject: Re: WD Head Alignment by Cover Position - last family/model?
PostPosted: September 9th, 2014, 9:11 
Offline
User avatar

Joined: June 8th, 2006, 19:44
Posts: 3144
Location: Atlanta, GA
My guess is Zeus.

The xxxAAKS had wider SA track widths and is not top-cover position dependent.

_________________
http://www.datasaversllc.com
Top
 Profile  
 
northwind
 Post subject: Re: WD Head Alignment by Cover Position - last family/model?
PostPosted: September 9th, 2014, 9:31 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3547
Location: Greece
What he said ^^^^

These don't have the alignment issue.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners
Top
 Profile  
 
LarrySabo
 Post subject: Re: WD Head Alignment by Cover Position - last family/model?
PostPosted: September 9th, 2014, 10:45 
Offline

Joined: December 8th, 2010, 11:37
Posts: 738
Location: Ottawa, Canada
Thanks kindly for your helpfulness. Rather than ask this question each time, is there a reference that would indicate whether the drive is dependent upon cover position? I'll try to find out which families pre-dated/followed Zeus in the meantime.

_________________
Sabo Computer Repairs & Data Recovery
Top
 Profile  
 
Alexii
 Post subject: Re: WD Head Alignment by Cover Position - last family/model?
PostPosted: September 9th, 2014, 11:11 
Offline

Joined: October 28th, 2009, 14:35
Posts: 775
Location: Toronto
Ah the memories =) Zeus the 4 platter monstrosity. Never did play nice for head swaps with a single donor. Always required a second one to pick up a few heads missing from primary try =) Was it the 1st 500 gb WD on the market ?
Top
 Profile  
 
northwind
 Post subject: Re: WD Head Alignment by Cover Position - last family/model?
PostPosted: September 10th, 2014, 4:54 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3547
Location: Greece
Alexii wrote:
Never did play nice for head swaps with a single donor. Always required a second one to pick up a few heads missing from primary try =)


Indeed. Those don't like it at all when they have their heads changed.
LarrySabo wrote:
Rather than ask this question each time, is there a reference that would indicate whether the drive is dependent upon cover position?

All pre-ROYL drives are cover position sensitive.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners
Top
 Profile  
 
pcimage
 Post subject: Re: WD Head Alignment by Cover Position - last family/model?
PostPosted: September 10th, 2014, 4:59 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
Alexii wrote:
Ah the memories =) Zeus the 4 platter monstrosity. Never did play nice for head swaps with a single donor. Always required a second one to pick up a few heads missing from primary try =) Was it the 1st 500 gb WD on the market ?


Yep, nasty things!

I've done a platter swap on one of these too, that was great fun!.... NOT :evil:

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
LarrySabo
 Post subject: Re: WD Head Alignment by Cover Position - last family/model?
PostPosted: September 10th, 2014, 10:53 
Offline

Joined: December 8th, 2010, 11:37
Posts: 738
Location: Ottawa, Canada
northwind wrote:
Alexii wrote:
LarrySabo wrote:
Rather than ask this question each time, is there a reference that would indicate whether the drive is dependent upon cover position?

All pre-ROYL drives are cover position sensitive.

Ah, thanks, Northwind! That's what I was looking for.

_________________
Sabo Computer Repairs & Data Recovery
Top
 Profile  
 
northwind
 Post subject: Re: WD Head Alignment by Cover Position - last family/model?
PostPosted: September 11th, 2014, 4:01 
Offline
User avatar

Joined: January 28th, 2009, 10:54
Posts: 3547
Location: Greece
You're most welcome.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 73 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group