ST500DM002 BUSY

Data recovery and HDD repair discussions

Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply
sempre

ST500DM002 BUSY

May 22nd, 2014, 8:42

HELLO!
Not access terminal...

Rst 0x10M
MC Internal LPC Process
Spin Up
(P) SATA Reset

Busy 100%, rpm ok, not sound (clicks, clicks)...

??
Nick_CT
  • Nick_CT
  • Posts: 1038
  • Joined: September 5th, 2010, 12:29
  • Location: South Africa

Re: ST500DM002 BUSY

May 22nd, 2014, 16:37

Short read channel on PCB for starters
longlife
  • longlife
  • Posts: 241
  • Joined: December 9th, 2010, 2:59
  • Location: kolkata

Re: ST500DM002 BUSY

May 23rd, 2014, 12:29

How to short??????
sempre

Re: ST500DM002 BUSY

May 23rd, 2014, 14:26

Nick_CT wrote:Short read channel on PCB for starters


Yes short channel pcb...

Sorry, not access terminal...

Is bad heads?
sempre

Re: ST500DM002 BUSY

June 10th, 2014, 9:17

sempre wrote:
Nick_CT wrote:Short read channel on PCB for starters


Yes short channel pcb...

Sorry, not access terminal...

Is bad heads?


Swap heads... is busy ....
log terminal

Boot 0x10M
Spin Up
RECOV Servo Op=0100 Resp=0005[0x00000000][0x0000BA10]
Trans.

Rst 0x10M
MC Internal LPC Process
Spin Up
RECOV Servo Op=0900 Resp=0005
RECOV Servo Op=0600 Resp=0005
RECOV Servo Op=0055 Resp=0005
RECOV Servo Op=0165 Resp=0005
RECOV Servo Op=0055 Resp=0005
RECOV Servo Op=0165 Resp=0005
RECOV Servo Op=0065 Resp=0005
RECOV Servo Op=0165 Resp=0005
RECOV Servo Op=0055 Resp=0005
(P) SATA Reset

?
labtech
  • labtech
  • Posts: 3669
  • Joined: August 18th, 2010, 17:35
  • Location: Massachusetts, USA

Re: ST500DM002 BUSY

June 10th, 2014, 16:34

Be patient
sempre

Re: ST500DM002 BUSY

June 10th, 2014, 16:44

labtech wrote:Be patient


SOLVED!

HEADS ORIGIANAIS...
sempre

Re: ST500DM002 BUSY

June 11th, 2014, 8:15

longlife wrote:How to short??????


yes!!
Madoka
  • Madoka
  • Posts: 79
  • Joined: June 3rd, 2014, 14:18
  • Location: Mitakihara - Japan

Re: ST500DM002 BUSY

June 11th, 2014, 8:36

sempre wrote:
labtech wrote:Be patient


SOLVED!

HEADS ORIGIANAIS...


I'm very sorry but i'm having a hard time trying to understand your posts.

Can you please elaborate on how did you manage to solve the problem with the drive ?
longlife
  • longlife
  • Posts: 241
  • Joined: December 9th, 2010, 2:59
  • Location: kolkata

Re: ST500DM002 BUSY

June 11th, 2014, 9:01

Any kindhearted expert, please explain in what is written in this thread.
Dmitri
  • Dmitri
  • Posts: 456
  • Joined: February 8th, 2014, 8:08
  • Location: Eastern Europe /recovering worldwide/
  • Website

ST500DM002 BUSY

June 11th, 2014, 9:33

longlife wrote:please explain in what is written in this thread.
According to the terminal log, everything is OK with the drive.
With the info available for now there's nothing else to explain.
fali2004
  • fali2004
  • Posts: 5
  • Joined: July 8th, 2014, 7:06
  • Location: España

Re: ST500DM002 BUSY

July 8th, 2014, 7:17

could tell me what the pin as do the short read-channel in the pcb?

thanks in advance
saltwater

Re: ST500DM002 BUSY

July 8th, 2014, 7:44

fali2004 wrote:could tell me what the pin as do the short read-channel in the pcb?

thanks in advance



Check this thread:
http://malthus.zapto.org/viewtopic.php?f=24&t=123&p=1632&hilit=read+channel#p1632
fali2004
  • fali2004
  • Posts: 5
  • Joined: July 8th, 2014, 7:06
  • Location: España

Re: ST500DM002 BUSY

August 5th, 2014, 4:40

Yesterday I was trying to unlock the terminal hard disk

Short read channel on PCB but did not have access

In the terminal reports me the following:

FAIL Op = 0100 Resp Servo = 0007
2BA0 ResponseFrame 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000
FAIL Op = 0100 Resp Servo = 0007
2BA0 ResponseFrame 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000
FAIL Op = 0100 Resp Servo = 0007
2BA0 ResponseFrame 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000
FAIL Op = 0100 Resp Servo = 0007
2BA0 ResponseFrame 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000

LED: 000000EE FAddr: 0010289C

What can be happening? Please I need help.

Thanks in advance
mikail13
  • mikail13
  • Posts: 210
  • Joined: December 14th, 2013, 17:10
  • Location: istanbul

Re: ST500DM002 BUSY

November 22nd, 2014, 13:10

fali2004 wrote:Yesterday I was trying to unlock the terminal hard disk

Short read channel on PCB but did not have access

In the terminal reports me the following:

FAIL Op = 0100 Resp Servo = 0007
2BA0 ResponseFrame 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000
FAIL Op = 0100 Resp Servo = 0007
2BA0 ResponseFrame 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000
FAIL Op = 0100 Resp Servo = 0007
2BA0 ResponseFrame 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000
FAIL Op = 0100 Resp Servo = 0007
2BA0 ResponseFrame 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000

LED: 000000EE FAddr: 0010289C

What can be happening? Please I need help.

Thanks in advance


Same error, same symptom
Is there a any help?
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

Board index