Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
November 2nd, 2015, 6:03
Hi, I need fw modules for lct10 5.1gb, if you have it lying around, upload it please, thank you.
November 2nd, 2015, 7:19
Hi,
helpless wrote:I need fw modules for lct10 5.1gb
I think modules by any tool will do, but preferably in .rpm format for pc3k.
November 3rd, 2015, 7:59
No problem, at least you tried to help and thanks for that.
There are a lot of unreadable, but non-critical modules, even data is accessible.
SMART modules were truncated, so I filled the missing space by zeros and wrote them back. Now firmware check shows that they are readable and have correct checksum. Nevertheless SMART cannot be read nor cleared.
I have here an lct10 that was bought for the pcb. Unfortunately most of the top cover screws and all of the warranty stickers have been removed, so firmware is considered as gone for good.
Maybe some good soul reading this request will save me (and the drive).
November 5th, 2015, 18:05
November 5th, 2015, 21:18
November 6th, 2015, 8:34
Thanks vx1, I will try it later, but this upload seems very close to my drive (firmware version matches). Still don't know, why SMART doesn't work.
Thanks for the warning Spildit. I shan't use ROM, I think it is OK.
Powered by phpBB © phpBB Group.