Don't recognized and clicking. A long time ago , consumer let the hdd to fall, but continued to using the hdd.
After the clicking : (at the end, show LED 0001)

.......
VDAC Offs K0 ............Done: 57
VN on
SHK on
VBEMF Offs ....Done
VBEMF Gain ....Done
A1O= 10 A2O= 4 SWO= - 7
A1G= 1339 A2G= 7 SWG= - 2
Rvcm= 11038 mOhm
TgtCyl= 5810
Ulatch= 2000 mips
Load = 3000 mips
LD..Stuck
UD..Stuck
VN off
SHK off
PK_3 C: 0 H:2
VDAC Offs K0 ............Done: 57
VN on
SHK on
VBEMF Offs ....Done
VBEMF Gain ....Done
A1O= 10 A2O= 4 SWO= 0
A1G= 1337 A2G= 7 SWG= 23
Rvcm= 11025 mOhm
TgtCyl= 5810
Ulatch= 2000 mips
Load = 3000 mips
LD..Stuck
UD..Stuck
VN off
SHK off
PK_3 C: 0 H:3
Unlatch Fail
EPOK
UDed
PK_4 C: 0 H:4
UDed
PK_4 C: 0 H:4
LED 0001
LED 0001
LED 0001
LED 0001
LED 0001
LED 0001

Maybe heads or scratched media ?

_________________
HD RECOVERY
Sao Jose do Rio Preto - SP
BRAZIL
+55 17 32276226
+55 17 99639-0175

ISTM that the headstack is stuck at the load/unload ramp.

_________________
A backup a day keeps DR away.

can't be if the OP says:


most be according to the log:

So what do these mean?

LD..Stuck
UD..Stuck
Unlatch Fail

_________________
A backup a day keeps DR away.

i guess it can't catch servo during unlach so it fails...
My first bet was stuck heads too, but reading the full post makes it clear it is not stuck.
pepe

_________________
Adatmentés - Data recovery

The drive appears to have failed to detect the servo on all 5 heads ???

Could this point to a PCB failure? Bad read channel? Dirty HDA contacts?

_________________
A backup a day keeps DR away.

if the drive was here i could tell it in minutes but by log...
on the other hand it might have got stuck in the meantime, but then it has 2 problems now: clicking and sticktion.
I am also not sure if this model checks servo on all heads or just fails if it can't find it on H0.
this is what's easy to sort out with proper tooling and knowledge even if we don't have log... but we need physical access to the drive.

pepe

_________________
Adatmentés - Data recovery

Maybe heads are stuck between the ramp and the platters which means platters rotate and heads click, drive can't load and unload and unlatch fails.

As pepe said, we're only guessing here.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners