All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 72 posts ]  Go to page Previous  1, 2, 3, 4
Author Message
 Post subject: Re: CA_FLUSH_ALL_GOT_CANCELED - what's wrong?
PostPosted: January 3rd, 2016, 20:19 
Offline
User avatar

Joined: November 24th, 2013, 18:13
Posts: 419
Location: Poland
Yes drive writes modules perfectly without errors . Yes, Sa normal start without problems. But arco can't calibrate this drive because arco can't access to user area. Btw I will try record this sytuaution What is happening with the disc. OK?

_________________
Hello everyone, sorry for my poor english, because i using google translator.


Top
 Profile  
 
 Post subject: Re: CA_FLUSH_ALL_GOT_CANCELED - what's wrong?
PostPosted: January 3rd, 2016, 20:27 
Offline

Joined: October 24th, 2005, 17:04
Posts: 242
ie there is no error CA_FLUSH_ALL_GOT_CANCELED?
Well, what then prevents restore the original modules?
and 03h, and 0Ch including? :shock:


Top
 Profile  
 
 Post subject: Re: CA_FLUSH_ALL_GOT_CANCELED - what's wrong?
PostPosted: January 4th, 2016, 8:23 
Offline
User avatar

Joined: November 24th, 2013, 18:13
Posts: 419
Location: Poland
Moltke wrote:
ie there is no error CA_FLUSH_ALL_GOT_CANCELED?

Yes, SA Initialized propertly, No Error :arrow: CA_FLUSH_ALL_GOT_CANCELED, But i can,t access to User Area, ARCO procedure Can't access to User Area, no SLOW responding.
Moltke wrote:
Well, what then prevents restore the original modules?
and 03h, and 0Ch including? :shock:
No pro equipment, WD Marvel is not able to restore module 03, only restore P-list from selftest logs.
Understand me?
Btw :arrow: I will try record this sytuaution What is happening with the disc. OK?

_________________
Hello everyone, sorry for my poor english, because i using google translator.


Top
 Profile  
 
 Post subject: Re: CA_FLUSH_ALL_GOT_CANCELED - what's wrong?
PostPosted: January 4th, 2016, 9:10 
Offline

Joined: October 24th, 2005, 17:04
Posts: 242
pikus_09 wrote:
Yes, SA Initialized propertly, No Error :arrow: CA_FLUSH_ALL_GOT_CANCELED,

and what caused this error? why she disappeared? :shuffle: :spy:


Top
 Profile  
 
 Post subject: Re: CA_FLUSH_ALL_GOT_CANCELED - what's wrong?
PostPosted: January 4th, 2016, 14:34 
Offline
User avatar

Joined: November 24th, 2013, 18:13
Posts: 419
Location: Poland
Nothing, but problem It occurs when you need access to the User Area, then everything locks up and you receive an error CA_FLUSH_ALL_GOT_CANCELED understand me?

_________________
Hello everyone, sorry for my poor english, because i using google translator.


Top
 Profile  
 
 Post subject: Re: CA_FLUSH_ALL_GOT_CANCELED - what's wrong?
PostPosted: January 4th, 2016, 14:58 
Offline

Joined: October 24th, 2005, 17:04
Posts: 242
Yes. now understood


Top
 Profile  
 
 Post subject: Re: CA_FLUSH_ALL_GOT_CANCELED - what's wrong?
PostPosted: January 4th, 2016, 15:02 
Offline
User avatar

Joined: November 24th, 2013, 18:13
Posts: 419
Location: Poland
Moltke wrote:
Yes. now understood

Great, Therefore I suspect the MCU, or bad solder connection on PCB.

_________________
Hello everyone, sorry for my poor english, because i using google translator.


Top
 Profile  
 
 Post subject: Re: CA_FLUSH_ALL_GOT_CANCELED - what's wrong?
PostPosted: January 5th, 2016, 18:01 
Offline
User avatar

Joined: November 24th, 2013, 18:13
Posts: 419
Location: Poland
pikus_09 wrote:
Moltke wrote:
Yes. now understood

Great, Therefore I suspect the MCU, or bad solder connection on PCB.
well, Moltke friend you are right, the problem is SA(SA modules), I write another Firmware: Ver: 00050065F and NO error-> CA_FLUSH_ALL_GOT_CANCELED.
Everything work's fine. :shock: , and now try to run ARCO seqence in WD MARVEL and adapt new firmware in my drive. Case Solved!!

_________________
Hello everyone, sorry for my poor english, because i using google translator.


Top
 Profile  
 
 Post subject: Re: CA_FLUSH_ALL_GOT_CANCELED - what's wrong?
PostPosted: January 6th, 2016, 7:24 
Offline

Joined: October 24th, 2005, 17:04
Posts: 242
pikus_09 wrote:
you are right, the problem is SA(SA modules), I write another Firmware: Ver: 00050065F and NO error-> CA_FLUSH_ALL_GOT_CANCELED.
Case Solved!!

I (and hopefully not only) is still in the research process
a preliminary conclusion, it is a new manifestation of the Slow responding


Top
 Profile  
 
 Post subject: Re: CA_FLUSH_ALL_GOT_CANCELED - what's wrong?
PostPosted: January 6th, 2016, 7:51 
Offline
User avatar

Joined: November 24th, 2013, 18:13
Posts: 419
Location: Poland
I think so, but in my case the problem was from the beginning with FW ie contents of damaged critical modules, one with the other invalid. Well then we'll see if in the end ARCO will begin to work with the drive. :?

_________________
Hello everyone, sorry for my poor english, because i using google translator.


Top
 Profile  
 
 Post subject: Re: CA_FLUSH_ALL_GOT_CANCELED - what's wrong?
PostPosted: February 27th, 2016, 17:21 
Offline
User avatar

Joined: November 24th, 2013, 18:13
Posts: 419
Location: Poland
Case cloused, because my black
ARCO procedure correctly goes, I'm after tests 6A, 6F, Zone TPI HeadQual, everything went without errors, mod 0C was filled with set values as more mod 03 has the correct value, as so far everything is OK.

So this error was caused by a problem FW and bad entries in the ROM. Everything works fine.

_________________
Hello everyone, sorry for my poor english, because i using google translator.


Top
 Profile  
 
 Post subject: Re: CA_FLUSH_ALL_GOT_CANCELED - what's wrong?
PostPosted: August 4th, 2021, 5:06 
Offline
User avatar

Joined: September 5th, 2010, 12:29
Posts: 1038
Location: South Africa
Opening up an old thread, it's the only one I could find relating to this error. I was about to ask for input, but then I solved it, posting here for anyone else who bumps into it in the future.

WD20EZRZ-00Z5HB0 came in, it would open in WD utility (PC3K) but no sector access. No SA access or ROM access. These kinds of errors:

***
ROM:
ROM reading............................. : HDDs ROM reading error Data request error - Device Error Detected: "CA FLUSH ALL GOT CANCELED"
ROM Firmware version.................... : Module ID 0B reading error Data request error - Device Error Detected: "CA FLUSH ALL GOT CANCELED"

Service area:
Permanent overlay....................... : Not loaded
SA dir reading (ID)..................... : CA FLUSH ALL GOT CANCELED
SA dir reading (ABA/CHS)................ : No S/A regions info avalable
SA Access............................... : NONE

Configuration reading................... : Module 02 not found
***

I shorted TV9/10 on PCB, got into kernel mode and blocked SA access. Repowered and uploaded loader and DIR to RAM from HDD surface, reloaded utility and read all ROM, ROM mods and SA mods. All read perfectly. Couldn't see an issue. Client complained drive got slower and slower before stopping working. Heads seemed fine too.

Ran slow responding solution and reenabled SA, access, problem solved.


Attachments:
1.PNG
1.PNG [ 120.27 KiB | Viewed 9269 times ]
2.PNG
2.PNG [ 68.96 KiB | Viewed 9269 times ]

_________________
Death is nothing, but to live defeated and inglorious is to die daily.
Data Recovery Cape Town
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 72 posts ]  Go to page Previous  1, 2, 3, 4

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 75 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group