MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 15 posts ] 
  Previous topic | Next topic 
Author Message
michael chiklis
 Post subject: Seagate 7200.12 Pharaoh stuck in BUSY - SYS file access OK!
PostPosted: July 29th, 2025, 6:53 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1744
Location: Verona, Italy
Hi,
i've this 7200.12 drive stuck in busy:

FAMILY: Pharaoh
Model: STM3500418AS
FW: CC38
s/n first 3 digits: 9VM

Terminal output:
Code:
Rst 0x10M
No HOST FIS-ReadyStatusFlags 2002A185
ASCII Diag mode

F3 T>


If i try the virtual boot patch i get this rom error
Attachment:
virtual boot.jpg
virtual boot.jpg [ 249.65 KiB | Viewed 2131 times ]


i can access and backup SYS only via serial mode
Attachment:
read by serial.jpg
read by serial.jpg [ 68.9 KiB | Viewed 2131 times ]


Can someone help me, please?

This are the ROM + most important SYS backup
https://www.mediafire.com/file/jt32f952 ... 8.rar/file

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI
Top
 Profile  
 
melvin
 Post subject: Re: Seagate 7200.12 Pharaoh stuck in BUSY - SYS file access
PostPosted: July 29th, 2025, 7:24 
Offline
User avatar

Joined: September 16th, 2015, 9:06
Posts: 353
Location: Poland
No HOST FIS-ReadyStatusFlags 2002A185
Ring any bells?

_________________
odzyskiwanie danych
Top
 Profile  
 
Lukas
 Post subject: Re: Seagate 7200.12 Pharaoh stuck in BUSY - SYS file access
PostPosted: July 29th, 2025, 7:25 
Offline
User avatar

Joined: July 10th, 2022, 15:11
Posts: 146
Location: Poland
https://blog.acelab.eu.com/pc-3000-hdd- ... error.html

_________________
Data recovery Poland (RAID, HDD, SSD) - https://hex-serwis.pl
Top
 Profile  
 
michael chiklis
 Post subject: Re: Seagate 7200.12 Pharaoh stuck in BUSY - SYS file access
PostPosted: July 29th, 2025, 9:51 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1744
Location: Verona, Italy
melvin wrote:
No HOST FIS-ReadyStatusFlags 2002A185
Ring any bells?


If you mean translator regeneration, i already send m0,6,3,,,,,22 after sys backup, but it didn't help.

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI
Top
 Profile  
 
melvin
 Post subject: Re: Seagate 7200.12 Pharaoh stuck in BUSY - SYS file access
PostPosted: July 29th, 2025, 10:10 
Offline
User avatar

Joined: September 16th, 2015, 9:06
Posts: 353
Location: Poland
I meant that terminal shows you what's wrong. Most of cases it's translator issue but can be caused by few things. Did you check NRG, SMART etc?
I don't use MRT and don't know why the patch doesn't work. Is the ROM read without any errors? Maybe there's somenthing about this error on their forum/site/support.

_________________
odzyskiwanie danych


Last edited by melvin on July 29th, 2025, 10:24, edited 1 time in total.

Top
 Profile  
 
michael chiklis
 Post subject: Re: Seagate 7200.12 Pharaoh stuck in BUSY - SYS file access
PostPosted: July 29th, 2025, 10:24 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1744
Location: Verona, Italy
Code:
F3 T>V80
Resident GList           0 entries returned
Total entries available: 0
    PBA    Len  Flags  Phy Cyl Hd  PhySctr    SFI

F3 T>/1

F3 1>N5
Att
Num  Flgs normlzd worst raw
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000
0   0000    0      0   00000000000000

F3 1>/

F3 T>V40
Nonresident GList           0 entries returned
Total entries available: 0
    PBA    Len  Flags  Phy Cyl Hd  PhySctr    SFI

F3 T>
ASCII Diag mode

F3 T>/T

F3 T>V4

Reassigned Sectors List
Entries: 0000, Retrieved: 0000, Alts: 0000, Removed: 0000, Pending: 0000, GList: 0000, RList: 0000

Idx  LBA      PBA      LLLCHS of LBA PLPCHS of PBA SFI    Hours Msecs  Status   BBM Mask

F3 T>


in terminal it let me access into p-list by sending V10 command (i didn't post here because it is very long).
Most of P-list has "80" flag, but i think it has some issues due to some other flags included as "8" - "10" - "C"

You can find the entire terminal log inside the rar file that i've uploaded on mediafire

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI
Top
 Profile  
 
michael chiklis
 Post subject: Re: Seagate 7200.12 Pharaoh stuck in BUSY - SYS file access
PostPosted: July 29th, 2025, 10:29 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1744
Location: Verona, Italy
melvin wrote:
I don't use MRT and don't know why the patch doesn't work. Is the ROM read without any errors? Maybe there's somenthing about this error on their forum/site/support.


I used F3romExplorer 1.0.9 to check the rom, it hasn't find any flipped byte. It says all OK
About MRT, i've contacted tech support, probably they will answer me in the middle of the night... i'm located in italy, they are in china.
I've use already the virtualboot function for other cases, it worked well for those, but for this case is not working. :?

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI
Top
 Profile  
 
melvin
 Post subject: Re: Seagate 7200.12 Pharaoh stuck in BUSY - SYS file access
PostPosted: July 29th, 2025, 10:37 
Offline
User avatar

Joined: September 16th, 2015, 9:06
Posts: 353
Location: Poland
Did you edit 93/ media cache?

_________________
odzyskiwanie danych
Top
 Profile  
 
michael chiklis
 Post subject: Re: Seagate 7200.12 Pharaoh stuck in BUSY - SYS file access
PostPosted: July 29th, 2025, 11:01 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1744
Location: Verona, Italy
Yes but not in ATA mode, i edited via terminal only after i saw that wasn't possible to get access via virtualboot by sending this:

Code:
F3 T>
ASCII Diag mode

F3 T>F"RWRecoveryFlags",00,22

(D) SATA Reset
Byte:00A2:       RWRecoveryFlags = 00

F3 T>F"BGMSFlags",00,22

(D) SATA Reset
Byte:011C:       BGMSFlags = 00

F3 T>F"PerformanceFlags",043C,22

(D) SATA Reset
Byte:057C:       PerformanceFlags = 04 3C

F3 T>F"MediaCacheControl",00,22

Invalid Diag Cmd Parameter

F3 T>

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI
Top
 Profile  
 
michael chiklis
 Post subject: Re: Seagate 7200.12 Pharaoh stuck in BUSY - SYS file access
PostPosted: July 29th, 2025, 11:42 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1744
Location: Verona, Italy
Attachment:
SA LBA error.jpg
SA LBA error.jpg [ 455.91 KiB | Viewed 2093 times ]


It has issues to access into this SA addresses
LBA 000055EE 0002B2A2

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI
Top
 Profile  
 
michael chiklis
 Post subject: Re: Seagate 7200.12 Pharaoh stuck in BUSY - SYS file access
PostPosted: July 29th, 2025, 11:46 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1744
Location: Verona, Italy
Attachment:
55EE.jpg
55EE.jpg [ 393.37 KiB | Viewed 2092 times ]
Attachment:
0002B2A2.jpg
0002B2A2.jpg [ 388.91 KiB | Viewed 2092 times ]

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI
Top
 Profile  
 
SWM
 Post subject: Re: Seagate 7200.12 Pharaoh stuck in BUSY - SYS file access
PostPosted: July 29th, 2025, 11:58 
Offline

Joined: February 22nd, 2023, 13:49
Posts: 334
Location: Eastern Europe
55EE - copy0, 2B2A2 - copy1. Mod ID 1B SysFile volume 3 ID 301. Len. 1 sector
Try to write from another or an empty sector.
...................................
If the error remains after rewriting, the recording heads are bad.
Top
 Profile  
 
michael chiklis
 Post subject: Re: Seagate 7200.12 Pharaoh stuck in BUSY - SYS file access
PostPosted: July 29th, 2025, 16:24 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1744
Location: Verona, Italy
I found how to fix it.
SOLVED!

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI
Top
 Profile  
 
skinbob
 Post subject: Re: Seagate 7200.12 Pharaoh stuck in BUSY - SYS file access
PostPosted: July 30th, 2025, 3:52 
Offline

Joined: November 3rd, 2023, 7:57
Posts: 50
Location: United Kingdom
Fancy sharing how to help people going forward?
Top
 Profile  
 
michael chiklis
 Post subject: Re: Seagate 7200.12 Pharaoh stuck in BUSY - SYS file access
PostPosted: July 30th, 2025, 4:55 
Offline

Joined: December 5th, 2011, 5:38
Posts: 1744
Location: Verona, Italy
skinbob wrote:
Fancy sharing how to help people going forward?


I've already provided the solution, i just repaired the damaged SYS.
I repaired SYS 301 copy 0 by overwriting it from copy 1.
SYS 319 is the biggest SYS, but i didn't overwrite it. I only tried to read it from copy 0 (the good one) for the purpose of backing it up (it took a long time in serial mode). After that, i tried to access SYS 319 copy 1 (which was previously damaged because it returned an error while reading), but this time it had no problems opening, so i didn't touch it.

After that, i sent the translator regeneration command m0,6,3,,,,,22 again, which this time took effect. I had already tried sending the command before i was able to understand that there were corrupt SYS, from the response log on the terminal it appeared that the m0 command had completed successfully but in reality it had no effect, the disk remained in busy.

_________________
My firmware database:
https://mega.nz/folder/O01DkBRI
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 15 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 40 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group