MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 28 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: Need Firmware Maxtor 4D040H2
PostPosted: October 14th, 2008, 5:12 
Offline
User avatar

Joined: March 28th, 2008, 7:52
Posts: 1466
Location: Europe, Hungary
BlackST wrote:
Missed a thing : need data or the drive?


In the first post: He needs the drive. ;)


Top
 Profile  
 
 Post subject: Re: Need Firmware Maxtor 4D040H2
PostPosted: October 14th, 2008, 5:21 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1052
Location: Bangladesh
Total overview of the topic:
1. SA-B is the backup of SA-A, if SA-A is corrupt than SA-B is used for read.
2. S/N selection is the mandatory part for Maxtor drives till now I followed... Also could be followed by the last 4 digit of the CODE & KMCA/KMBA/NMCB etc.
3. Mod#51 is the error one for most of the Maxtor drive, clear Log at Defect List Operation, it will be solved, u can ignore it, no prob. Mod#100 is corrupt module always for 4D0XXXXX HD.
4. Don't need to upload all mods. only upload corrupted.
5. All sector shows bad, Selfscan will solve it. I think, u might uploaded all modules, thats why all sector shows as bad sector. (only applicable for refurbishing not for data recovery)
if something missing here, remind me please.

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
 Post subject: Re: Need Firmware Maxtor 4D040H2
PostPosted: October 14th, 2008, 7:53 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
In fact the drive has every symptom of wrong adaptives...


Top
 Profile  
 
 Post subject: Re: Need Firmware Maxtor 4D040H2
PostPosted: October 14th, 2008, 14:10 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
Uh... No, maybe is possible. I have developed some workaround for weak heads so why not someone else? Strange they want to sell it...


Top
 Profile  
 
 Post subject: Re: Need Firmware Maxtor 4D040H2
PostPosted: October 14th, 2008, 14:23 
Offline

Joined: June 27th, 2006, 11:33
Posts: 2288
Location: In ur HDD !
shahij,
Most of the times if Sa-A and B are corrupt on same sectors .
I dont understand why this happens .


Top
 Profile  
 
 Post subject: Re: Need Firmware Maxtor 4D040H2
PostPosted: October 15th, 2008, 14:48 
Offline
User avatar

Joined: August 15th, 2006, 3:01
Posts: 3522
Location: CDRLabs @ Chandigarh [ India ]
BlackST wrote:
Missed a thing : need data or the drive?


No Data ,
Experimenting ,But I Need To Read the ACe Maxtor Manual For Unique Modules ,I will Upload The Original Patient SA-A Into SA-A And Then Replace Only Currepted Modules ,Will Not Touch The SA-B ,I Think If SA-A Can Be Read 100% Properly Maxtor Will Not Touch SA-B .Well In My Case SA-B Has So Many Module Errors .

_________________
Regards
Amarbir S Dhillon , Chandigarh Data Recovery Labs [India]
Logical,Semi Physical And Physical Data Recovery
Website-> http://www.chandigarhdatarecovery.com


Top
 Profile  
 
 Post subject: Re: Need Firmware Maxtor 4D040H2
PostPosted: October 15th, 2008, 16:06 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
I suggest fixing the SA errors manually before rewriting modules. In any case having different adaptives won't record correctly (especially for R/W distance) to SA.
Can you start selfscan from RAM ?


Top
 Profile  
 
 Post subject: Re: Need Firmware Maxtor 4D040H2
PostPosted: October 16th, 2008, 4:40 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1052
Location: Bangladesh
rameez wrote:
shahij,
Most of the times if Sa-A and B are corrupt on same sectors .
I dont understand why this happens .

till 4D series hd, i got this problem. but i dont know why. but later series better in this case. 6e... next....
Amarbir wrote:
BlackST wrote:
Missed a thing : need data or the drive?


No Data ,
Experimenting ,But I Need To Read the ACe Maxtor Manual For Unique Modules ,I will Upload The Original Patient SA-A Into SA-A And Then Replace Only Currepted Modules ,Will Not Touch The SA-B ,I Think If SA-A Can Be Read 100% Properly Maxtor Will Not Touch SA-B .Well In My Case SA-B Has So Many Module Errors .

24,55,120 unique modules for maxtor (P-List)
56,57,79 boot modules, need to upload together.
BlackST wrote:
I suggest fixing the SA errors manually before rewriting modules. In any case having different adaptives won't record correctly (especially for R/W distance) to SA.
Can you start selfscan from RAM ?

better choice...

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 28 posts ]  Go to page Previous  1, 2

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 59 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group