Joined: October 2nd, 2009, 14:38 Posts: 118 Location: United States
|
|
Here are the specs:
Seagate 7200.7 Model: ST380013AS SN: 5MR4BYM7 Firmware 8.12
Drive is clicking and not recognized. Terminal in SD gives Head Mask FFFF and Error Reading Reserve Track Defect List. In reading through previous posts this is probably a bad head stack, correct? The client (of course) doesn't want to spend the money to do a complete head stack swap, but I was wondering (again based on previous posts on the subject) if cleaning the heads with IPA would be a reasonable next step? Reading some of SD's literature there was a coating that Seagate put on some drives that flakes off and causes head problems. If I remove the cover, will this flaking be visible (in your experience)?
I know, alot of questions....thanks for any advice.
|
|