OCZ Vertex 2 240GB SSD for recovery

[hhddrec]

Hi guys, I have here a OCZ Vertex2 240GB SSD for recovery

When i plug it to my PC BIOS not recognize it wait about 1 minute but no t rcognize SSS.

I try with difernet PCs but the same way

I opened case and i can see Power Led continuously in Green and FLT initialy power up (RED) for a fraction of a second, then turns power off for 2 seconds and then power up continously (in RED).

I atach to tx/RX and i get this log:



CLI> PINRST
*** ROM 106 Mar 12 2009 20:29:35 ***
FW_SRC 0 SHA PASS!
*** EEPROM 207 Jan 3 2011 18:36:47 BuildServer:FW_Common_Critical_Fixes:P1_EEPROM_2_0_7_drop-290232 ***
IMFT25 Timing EPch
*** Patch 1.4.1 Aug 22 2011 18:55:20 BuildServer:FW_Common_Build_Release:P1_3_6_4_MP4_Patch4_RC1_Drop-333796 ***
IMFT25 Timing EPch
RCPch SAK0
ÿ ýÞÙ °€¤

ýÞýÞýÞ}ýÞýÞþÀþ?}ýÞýÞ}ýÞýÞ}ýÞýÞýÞýÞýÞýÞýÞþ‚ýÞ
ýÞýÞ\º¯ýÞýÞýÞkŸ4R ýÞÙ °€<¤

ýÞýÞýÞ ýÞýÞýÞýÞýÞýÞ
ýÞýÞýÞ}ýÞýÞ}ýÞýÞýÞýÞýÞýÞýÞþ‚ýÞ
ýÞýÞ\º¯ýÞýÞýÞHi(Ò ýÞÙ °€”¤

ýÞýÞýÞýÞýÞýÞýÞýÞýÞýÞ ýÞýÞ}ýÞýÞ}ýÞýÞýÞýÞýÞýÞýÞþ‚ýÞ
ýÞýÞ\º¯ýÞýÞýÞ<W€Í ýÞÙ °€ð¤

ýÞýÞýÞýÞ
ýÞýÞýÞýÞýÞ÷
ýÞýÞ}ýÞýÞ}ýÞýÞýÞýÞýÞýÞýÞþ‚ýÞ
ýÞýÞ\º¯ýÞýÞýÞ:kû ýÞÙ °€H¥

ýÞýÞýÞ$ýÞýÞýÞýÞýÞýÞ÷
ýÞýÞ}ýÞýÞ}ýÞýÞýÞýÞýÞýÞýÞþ‚ýÞ
ýÞýÞ\º¯ýÞýÞýÞû§? ýÞÙ °€`y

ýÞýÞýÞ
ýÞýÞýÞÿþ?ýÞýÞýÞýÞÿþ?ýÞýÞ¬ã
€`ÿþ?
ýÞýÞýÞøºþ?ýÞýލ×õ ýÞÙ °€¨y

ýÞýÞýÞýÞýÞýÞýÞÔy
äy
ýÞýÞýÞýÞýÞýÞæýÞÙ °€ýÞýÞýÞýÞäýÞýÞýÞØx ýÞ Ù °€¨y

ýÞýÞýÞ
ýÞýÞýÞÔy
äy
ýÞ ýÞýÞýÞýÞæýÞÙ °€ýÞýÞýÞýÞäýÞýÞ J" ýÞ
Ù °€¨y

ýÞýÞýÞýÞýÞýÞÔy
äy
BýÞýÞýÞýÞýÞýÞæýÞÙ °€ýÞýÞýÞýÞäýÞBýÞýÞ)[úö ýÞÙ °€¨y

ýÞýÞýÞýÞýÞýÞÔy
äy
BýÞ ýÞýÞýÞýÞæýÞÙ °€ýÞýÞýÞýÞäýÞBýÞ ;&¬ ýÞÙ °€„¥
ýÞýÞýÞ
ýÞýÞýÞýÞýÞýÞýÞýÞýÞ ýÞýÞýÞðfýÞýÞýÞýÞžýÞýÞýÞ=½b¨ ýÞ
Ù °€@\

ýÞýÞýÞýÞýÞýÞýÞÈÖ¹? ýÞÙ °€ä~
ýÞýÞýÞ`ýÞ@ ýÞýÞýÞýÞýÞýÞýÞýÞ†˜z[ ýÞÙ °€^

ýÞýÞýÞò
@ë–
ýÞÙ °€Ø
ýÞýÞýÞ
ýÞýÞýÞýÞýÞýÞ
ýÞýÞýÞýÞýÞýÞ¨
ýÞýÞýÞýÞ¥F¦ ýÞÙ °€ä~
ýÞýÞýÞ`ýÞ@ýÞýÞýÞ@ýÞýÞýÞýÞýÞP³pv ýÞÙ °€^

ýÞýÞýÞPQ
@ØéÃF ýÞÙ °€(ž
ýÞýÞýÞýÞ=ýÞ1.35ýÞýÞýÞýÞýÞýÞýÞýÞýÞýÞýÞýÞ¡4ë" ýÞÙ °€pž
ýÞýÞýÞýÞ°0I ýÞÙ °€ä~
ýÞýÞýÞ`ýÞ@ýÞýÞýÞüýÞýÞýÞýÞýÞ!­³} ýÞÙ °€^

ýÞýÞýÞìýÝ
@1›
² ýÞÙ °€ä~
ýÞýÞýÞ`ýÞ@ýÞýÞýÞ`ýÞýÞýÞýÞýÞôpV ýÞÙ °€^

ýÞýÞýÞæ
@‘9<e
ýÞÙ °€ƒ
 ýÞýÞýÞýÞýÞýÞýÞ€í
@ð}þ?
ýÞýÞýÞ
ýÞýÞýÞýÞýÞýÞýÞýÞýÞýÞýÞýÞ·ã
@õs© ýÞ

Any idea?

Thanks for your help

[einstein9]

SandForce controller inside?

[hhddrec]

Yes SandForce controler

Info about Chip SandForce

CONTROLER
Sandforce
SF-1222TA3-SBH
P4H888.00
4610 TAIWAN

[einstein9]

Yes SandForce controler

Info about Chip SandForce = Encrypted Data by controller
not as easy as it looks

#2 you may check the latest acelab NAND, i think (not sure) supports it (MAYBE)



CONTROLER
Sandforce
SF-1222TA3-SBH
P4H888.00
4610 TAIWAN

[hhddrec]

Hi einstein9

i was lookin into AceLab infor but Acelab not supports it



I include Pics


Any new idea?
Thanks

NOte: Sorry i por another thread

Attachments

[Doomer]

Any new idea?

you screwed

[einstein9]

Any new idea?

you screwed

IF:

1- this is your client hdd ----> return it back there is nothing you can do
2- this is yours ---> keep in somewhere and just wait there might be later (but sure not very soon)

not much to start with.

in fact i bought few here and saved it for later investigation but sure will be very long

The only reason for time is so that everything doesn't happen at once. By: Albert Einstein

[hhddrec]

Hi Doomer

I do not untherstand you

what about. you screwed?

[hhddrec]

Hi einstein9

I think like you

is a recovery for a customer. but i think the is only a FW problem, this cain of problems must be reparable. if you know something for this case, please contac me.

Thanks.

[Doomer]

Hi Doomer

I do not untherstand you

what about. you screwed?

It means that most likely you will not be able to find somebody that would be able to get data back from that SSD for a reasonable amount in a reasonable time

[hhddrec]

ohh

thanks Doomer

but must be reflasheable.

must be posible. tha matter is: how to reflash it?


Thaks for your help

[hhddrec]

anybody knows anyoter way?
maybe FW Update or FW repair? maybe FW electronisc repair?


Thaks for your help

[BlackST]

I have solutions either for data recovery OR repair / refurb the drive for reuse (if it is reasonably damaged).
But again data recovery if possible IS EXPENSIVE , repair/refurb maybe is cheap, but you have to send the SSD in AND it is not $10 in any case (neither 20 neither 30)

PLEASE don't contact me asking how to repair it or any other technical info.

[Doomer]

I have solutions either for data recovery OR repair / refurb the drive for reuse (if it is reasonably damaged).

That's promising news

[hhddrec]

I have solutions either for data recovery OR repair / refurb the drive for reuse (if it is reasonably damaged).

That's promising news

Totaly agree with that !

Thanks BlackST
IF is reparable, his is a good news, but for this case, data recovery is needed.

I wait for news about Data recovery dor this case.

Thanks.

[BlackST]

Everything depends on what happened.

At present I can say that the power failures that lead to electronics failure on HDDs seem to be more destructive on SSDs , seen relatively few catastrophical failures vs. total failures but in any case it was worth repairing the PCB.

P.S. I see here people are starting to throw away SSDs and stick again to the old fashioned HDDs - especially when the SSD turns "read only" (at least data is safe)... have quite a stock for parts

[hhddrec]

Everything depends on what happened.

At present I can say that the power failures that lead to electronics failure on HDDs seem to be more destructive on SSDs , seen relatively few catastrophical failures vs. total failures but in any case it was worth repairing the PCB.

P.S. I see here people are starting to throw away SSDs and stick again to the old fashioned HDDs - especially when the SSD turns "read only" (at least data is safe)... have quite a stock for parts

Thanks BackST.

You think this case is about power failures?

[BlackST]

There seems no evident damage (from picture) but the garbled data you get on terminal output make me think about either malfunction / FW problem.

Out of curiosity does the Sandforce chip heat abnormally ?

[hhddrec]

There seems no evident damage (from picture) but the garbled data you get on terminal output make me think about either malfunction / FW problem.

Out of curiosity does the Sandforce chip heat abnormally ?

Hi BackSt
Thanks for your quick reply
Sandforce chip is not heating.

thanks

[hhddrec]

Hi BackSt, Sandforce chip is not heating.

Any advice?