Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
April 14th, 2010, 16:48
I made an experiment with a hard disk Seagate 500 GB with problems of stuck motor. I put within the freezer 1 day, the next day I removed it of the freezer and connect it to the PC3000, I struck 3 times in the later part of the disc and this he started. That funny. .je je je
April 14th, 2010, 16:58
HTC_guy wrote:Russwinters wrote:What was the final solution? Y cable?
Always good to post the final solution for future users who run into a similar problem.
Good thinking... The solution?
I put the drive into the deep freeze then ran a USB cable to my laptop which I placed on top of the freezer.
Took two or three attempts, but I got all the info off that I needed.
Anyone care to explain why the freezing cold allows me to access the drive?
This is definitely any of the "professional's" way, i am sure...
April 16th, 2010, 12:03
There are explanations to why freezer *MAY* help in *CERTAIN* *SPECIFIC* situations, but in this case I am surprised that it worked.
April 16th, 2010, 13:27
Russwinters wrote:There are explanations to why freezer *MAY* help in *CERTAIN* *SPECIFIC* situations, but in this case I am surprised that it worked.
Well ,
All Dr Pros Here Many People Infact non Pros Tell It works I wonder We Never Try something like This
Powered by phpBB © phpBB Group.