Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
December 3rd, 2013, 15:49
The V1 list is back properly now after some more work
(except a minor difference in Hd4 numbers)
Experiments continue
December 23rd, 2013, 15:29
Experiments in rebuilding Non resident G list continue on
viewtopic.php?f=13&t=27618
July 3rd, 2014, 13:42
jignesh, I have the same problem and the output of the command terminal is something like this
data of HDD:Seagate, Barracuda 7200.12, ST3250318AS, FW: CC38, PCB: 100532367 Rev B, 250GB
F3 T>^C
Spinning Down
Spin Down Complete
Elapsed Time 6.012 secs
Delaying 5000 msec
Jumping to Power On Resetý
Rst 0x08M
No HOST FIS-ReadyStatusFlags 2002A185
ASCII Diag mode
F3 T>
The terminal answer any commands, but HDD is not recognized by the BIOS or
the Operating System.
These images show the data on the HDD.
Wath can i do to solve this throught the terminal?.
July 3rd, 2014, 16:14
Loks like this pretty common problem with 7200.12 drives which can be solved through 93 system file (with PC3000 at least).
July 7th, 2014, 5:45
HDD not detected in bios with firmware version CC38 How to make it work again and backup the data
Powered by phpBB © phpBB Group.