Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Re: 7200.12

November 21st, 2012, 17:41

Hello

Im having just the same issue with the same harddrive

Rst 0x10M
No HOST FIS-ReadyStatusFlags 2002B001

Busy...

MODEL: ST3500418AS
FIRMWARE: CC38


how did you fixed it ? can you place write ?? I cannot PM as Im new in this forum. I'll be happy if you can help me on this .
really need this data on harddrive

Re: 7200.12

November 23rd, 2012, 3:17

:shock: :cry: :twisted: :roll: :!: :?:
Rough...

Snakez.

Re: 7200.12

November 27th, 2012, 18:15

please help about short circuit thanks hddguy,

Re: 7200.12

July 4th, 2013, 12:38

Hey, I have the same problem....! please, you could help a lot of us by posting your solution :)

Re: 7200.12

November 7th, 2013, 8:18

sempre wrote:
hddguy wrote:You need short circuit for this


CHECK PM


need short circuit picture for my troble...my board 100532367 rev b....before and after thanks

Re: 7200.12

November 8th, 2013, 8:30

tri satya wrote:
sempre wrote:
hddguy wrote:You need short circuit for this


CHECK PM


need short circuit picture for my troble...my board 100532367 rev b....before and after thanks

No HOST FIS-ReadyStatusFlags 2002B001
ASCII Diag mode

F3 T>/2

F3 2>z

ExecuteSpinRequest

HighPowerMode
Failed to load overlay 00000004
LED:000000CC FAddr:0028931D

Re: 7200.12

December 29th, 2014, 13:34

I need short circuit for 100517995 Rev.C, help me please.

Re: 7200.12

December 29th, 2014, 15:29

Tip: How to identify the Read Channel test points:
http://www.alexsoft.org/viewtopic.php?f=24&t=123&p=149

Re: 7200.12

February 15th, 2015, 9:20

In my 7200.12 100517995 REV C i can't find the test points for short,please, can anyone help me? Thanks.
Attachments
20150215_140954.jpg
20150215_140920.jpg

Re: 7200.12

May 30th, 2017, 4:30

sempre, Please tell how you solve the issue.... send PM

Re: 7200.12

June 1st, 2017, 2:10

oriolclausells, friend this hdd has latest firmware u need to short the pcb after second spinup msg appear in cmd after complete calibration of hdd
Post a reply