Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Re: ST1000LM035-1RK172 MCMT table is corrupted

March 30th, 2019, 22:06

congratulations MindMergepk.

Re: ST1000LM035-1RK172 MCMT table is corrupted

March 31st, 2019, 4:38

sorry for double

Re: ST1000LM035-1RK172 MCMT table is corrupted

September 9th, 2019, 15:55

@MindMergepk
please can u send to pm, i have ident problem, cannot read 348 and have MCMT table is corrupted

Re: ST1000LM035-1RK172 MCMT table is corrupted

September 9th, 2019, 16:18

MindMergepk wrote:it can be fixed easily, sorry but can't share it here.
i send you pm few days back, but it seems you are not interested.

good luck.


@MindMergepk
please can u send to pm, i have ident problem, cannot read 348 and have MCMT table is corrupted

Re: ST1000LM035-1RK172 MCMT table is corrupted

September 11th, 2019, 15:10

extremestyle wrote:
MindMergepk wrote:it can be fixed easily, sorry but can't share it here.
i send you pm few days back, but it seems you are not interested.

good luck.


@MindMergepk
please can u send to pm, i have ident problem, cannot read 348 and have MCMT table is corrupted



pm sent

Re: ST1000LM035-1RK172 MCMT table is corrupted

May 13th, 2020, 21:39

Hi guys,
I've got the same problem with this drive:
Prod Desc: CheopsLiteM.1.0.SATA.Rosewood.Mule.Servo376.Rap30.AP1.4K + SMR Despo DFW
Package Version: RO08B6.SDM2.CC4618.SBM3
Changelist: 01111305
Model #: ST1000LM035-1RK172
ID: 101
Servo FW Rev: 6B61H

MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted

The bad news is that I don't own MRT or PC3K. I could only rely on COM port and ATA terminals.
Anybody willing to help me?

Re: ST1000LM035-1RK172 MCMT table is corrupted

May 14th, 2020, 11:51

The first question how are you willing to unlock the terminal without any tools. Of course it is possible, i too wrote my tool well before those tools were available. After that it should be a POC, if you only need to repair the drive. Recovering the data is a bit more complicated.
pepe

Re: ST1000LM035-1RK172 MCMT table is corrupted

May 14th, 2020, 13:50

I have helped many people and hope that this time somebody might help me. I know nothing about these Rosewood drives, so I can't see what options I've got. But buying a tool like MRT or PC3K isn't an option.

Re: ST1000LM035-1RK172 MCMT table is corrupted

May 14th, 2020, 15:31

BGman wrote:I have helped many people and hope that this time somebody might help me. I know nothing about these Rosewood drives, so I can't see what options I've got. But buying a tool like MRT or PC3K isn't an option.

In theory, the MRT card and the first month's activation is under $500.

Re: ST1000LM035-1RK172 MCMT table is corrupted

May 14th, 2020, 18:31

BGman wrote:I have helped many people and hope that this time somebody might help me. I know nothing about these Rosewood drives, so I can't see what options I've got. But buying a tool like MRT or PC3K isn't an option.


read the ROM with a programmer and post here, will try to help you.

Re: ST1000LM035-1RK172 MCMT table is corrupted

May 14th, 2020, 23:28

MindMergepk wrote:read the ROM with a programmer and post here, will try to help you.

No option to read it by serial port ?

Re: ST1000LM035-1RK172 MCMT table is corrupted

May 15th, 2020, 5:11

you need to write some code to do that. There is no command to read flash OOB.

pepe

Re: ST1000LM035-1RK172 MCMT table is corrupted

May 16th, 2020, 5:59

Rosewood_A5.zip
This is the ROM.
(459.52 KiB) Downloaded 639 times
MindMergepk wrote:read the ROM with a programmer and post here, will try to help you.

Re: ST1000LM035-1RK172 MCMT table is corrupted

May 25th, 2020, 3:02

Need Help as someone requested above
I have seagate st1000lm035 with diagnostic port locked
I have no tools except serial port device for commands
///
Here are serial outputs
//
Prod Desc: CheopsLiteM.1.0.SATA.Rosewood.Mule.Servo376.Rap30.AP1.4K + SMR Despo DFW
Package Version: RO08B6.SDM2.CC4646.SBM3
Serial #: WDEDGRW7
Changelist: 01155569
Model #: ST1000LM035-1RK172
ID: 101
Servo FW Rev: 6B68
---------------------------------------------
Boot 0x80M
Rst 0x80M
Srv DETCR init 0x0000
(P) SATA Reset

RAW OFF
PASS
EDAC Value = 00000000FFFFF844
EDAC Value = 00000000FFFFF844
EDAC Value = 00000000FFFFF844
EDAC Value = 00000000FFFFF844
EDAC Value = 00000000FFFFF844
EDAC Value = 00000000FFFFF844
EDAC Value = 00000000FFFFF844
EDAC Value = 00000000FFFFF844
(DOS Table) Worst Count: 00000000 At SU: FFFFFFFF NT: 00000000 OT: 00000000
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted
MCMT table is corrupted

Re: ST1000LM035-1RK172 MCMT table is corrupted

May 25th, 2020, 4:57

Without tools, you cannot work with this drive.

Re: ST1000LM035-1RK172 MCMT table is corrupted

May 25th, 2020, 5:18

Ok. Sad news

Re: ST1000LM035-1RK172 MCMT table is corrupted

June 3rd, 2020, 1:49

I haven't bought a standard big storage drive in years so I have no idea what everyone considers the sweet spot for price and space. I know I want something larger than a TB, as thats all I have now, and the last time I bought a regular hard drive 1 TB drives were pretty much the largest monsters you could afford.

So what's there to do now? 3 or 4 TBs? Do hard drives last based on their brand?

I want something that isn't a bank breaker and will up my storage space by a few times going from a single 1TB.10.0.0.0.1 192.168.1.254 happymod

Re: ST1000LM035-1RK172 MCMT table is corrupted

June 3rd, 2020, 8:04

pcimage wrote:Without tools, you cannot work with this drive.

Are you sure?
:lol: :lol: :lol:

Re: ST1000LM035-1RK172 MCMT table is corrupted

June 4th, 2020, 8:46

yeah, you either write your tools or buy something commercially available. In either case you have something in your hands :)
pepe

Re: ST1000LM035-1RK172 MCMT table is corrupted

June 4th, 2020, 13:19

pepe wrote:yeah, you either write your tools or buy something commercially available. In either case you have something in your hands :)
pepe

Do you consider a tool stuff like a hexeditor or SPI programmer?
Post a reply