March 11th, 2019, 7:40
March 11th, 2019, 9:56
dd if=/dev/zero of=/dev/sda oflag=direct seek=875000000 count=65000000March 11th, 2019, 16:26
March 11th, 2019, 16:36
March 12th, 2019, 6:35
Krush206 wrote:Then you're out of luck. How many sectors were remapped on this drive?
March 12th, 2019, 11:10
zynx wrote:hello, im new in this forum and i was curious about this topic… well, i had an old conserved drive here with 80 gb of storage and decided to give a try on this… my drive also bricked after using phoenix. bios takes 10 seconds to recognize drives but ends up not recognizing this one anymore… i also thought the guy was saying bs but i have to confirm it does bricks drives since it bricked mine… i will later try to use a magnet to check if the drives gets alive again…
March 12th, 2019, 11:57
Nvidea wrote:has some smd capacitors a little dark on the board maybe it's problem?
https://imgur.com/a/f6W8zC7
Nvidea wrote:dd: error reading ‘/dev/sda’: Input/output error
1080+0 records in
1080+0 records out
I have tried several times as you explained to me,
shred -vzn 0 /dev/sdaMarch 12th, 2019, 16:03
March 12th, 2019, 16:27
Krush206 wrote:So, I ended up putting the drive in the freezer four times or so, that didn't solve the issue. But then I thought about using a magnet and it worked! I have no idea why but after magnetizing the drive there are no more read failures. Though, I still think there is something botched in the drive's firmware, S.M.A.R.T. data's attributes got randomized a couple of times after freezing the drive. This is not new though, it used to get randomized very few times even before I froze the drive. But stopped after using a magnet
March 12th, 2019, 17:40
Spildit wrote:1 - It's impossible for a OS to brick the drive. In worst case you would need something like a malware/virus that would gain kernel access to send direct I/O to the drive and use VSCs to kill the firmware, etc .... Meaning ... There is NO WAY for the OS itself to "damage" the drive even more in the way you describe (progressive damage over time with changed S.M.A.R.T. data).
2 - If you put a magnet on the top of the drive if you are lucky not to damage the heads you will end up damaging the platter anyway. Servo marks will be gone, heads will not find servo and drive will just click ..... The freezer and other junk that you did write will only make matter worse.
I will not comment any further just if someone is thinking of doing something like this to refurb or ressurect a drive just forget, IT WILL NOT WORK. EVER.
This is BS.
Why you say it's bullshit? I literally put the magnet (which wasn't powerful at all like those in a microwave) around the drive for 3 or 4 times (I haven't disassembled it), without exceptions. That was the only thing which 'ressurected' the drive.
March 12th, 2019, 18:13
Nvidea wrote:You freeze the body and the pcb together?
and how you do with using a piece of magnet?
March 12th, 2019, 20:12
Nvidea wrote:check for me if it is error, i'm try disable security password ..
i get error unsupported comand. press any key
https://imgur.com/a/DYkpvG7
later i reboot PC and get
https://imgur.com/a/hRLnTbH
is correct ?
i no able to modify or disable the password
and I better run these scripts on security off?
on mhdd also is possible modify? what commands?
March 13th, 2019, 7:46
March 13th, 2019, 8:38
March 13th, 2019, 11:07
dd if=/dev/sda of=/dev/null skip=875000000 status=progressMarch 13th, 2019, 16:32
March 13th, 2019, 21:52
Spildit wrote:The more i read this thread the more i think this is a big joke ...
Just buy a new drive ? You are not going to be able to fix it with software ...
Spildit wrote:What ... No MAGNET ? Not fun ...
What about placing the drive one the microwave for a while ? If not try a grill. Select "well toasted" and have fun ! Will work like new.
March 14th, 2019, 6:18
Spildit wrote:What ... No MAGNET ? Not fun ...
What about placing the drive one the microwave for a while ? If not try a grill. Select "well toasted" and have fun ! Will work like new.
March 15th, 2019, 7:20
Powered by phpBB © phpBB Group.