MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Previous topic | Next topic 
Author Message
ariann
 Post subject: WD800BB-22JHCO Device Error Detected
PostPosted: October 17th, 2008, 4:27 
Offline

Joined: November 22nd, 2007, 5:53
Posts: 32
I have WD800BB-22JHC0 and try to run utility in PC3K. But it appeared "WD Techno Key Error - Device Error Detected 51/04 (ABR). It also detected wrong model & serial number.
But the drive spin and become 'ready' and no clicking/knocking sound.
What cause of this problem?

Thanks
Top
 Profile  
 
harddrivespecialist
 Post subject: Re: WD800BB-22JHCO Device Error Detected
PostPosted: October 17th, 2008, 12:35 
Offline

Joined: January 15th, 2008, 11:06
Posts: 1419
Location: Providence, RI. Boston, MA USA
Which PC3000 are you using?

At which point does it fail? Exactly please.

_________________
www.datarecoveryne.com
Top
 Profile  
 
drc
 Post subject: Re: WD800BB-22JHCO Device Error Detected
PostPosted: October 18th, 2008, 1:11 
Offline

Joined: August 12th, 2008, 13:11
Posts: 3235
Location: USA
Also, what is the wrong model and serial number that it detected?

_________________
You don't have to backup all of your files, just the ones you want to keep.
Top
 Profile  
 
ariann
 Post subject: Re: WD800BB-22JHCO Device Error Detected
PostPosted: October 21st, 2008, 5:51 
Offline

Joined: November 22nd, 2007, 5:53
Posts: 32
sorry for late reply..i've been so busy lately..
I've found the answer - somebody in this forum said it was because the model is not supported by PC3K..
But if you all have any comment or different opinion about that pls let me know...
anyway I'm using PC3K PCI and the model & SN detected like this:
Model : WDC ROM MODEL ....
Serial : WDC-ROM SN#XYZ---------
Top
 Profile  
 
harddrivespecialist
 Post subject: Re: WD800BB-22JHCO Device Error Detected
PostPosted: October 21st, 2008, 10:15 
Offline

Joined: January 15th, 2008, 11:06
Posts: 1419
Location: Providence, RI. Boston, MA USA
PCI does support that model.
Most likely firmware issue.

_________________
www.datarecoveryne.com
Top
 Profile  
 
BlackST
 Post subject: Re: WD800BB-22JHCO Device Error Detected
PostPosted: October 21st, 2008, 10:27 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
Rom corruption.... Sometimes a partial corruption does not prevent the drive from starting. Could also be a translator issue, in any case I vote for firmware, either in the PCB or inside the disk.
Top
 Profile  
 
beto
 Post subject: Re: WD800BB-22JHCO Device Error Detected
PostPosted: October 21st, 2008, 15:01 
Offline

Joined: October 21st, 2005, 0:45
Posts: 1517
Location: Mexico
What do u need on first repair it or DR?
Top
 Profile  
 
unknown
 Post subject: Re: WD800BB-22JHCO Device Error Detected
PostPosted: October 21st, 2008, 16:07 
Offline

Joined: October 21st, 2007, 8:48
Posts: 1712
did you change the original PCB ?

1-If you did, did you solder the ROM IC from the original PCB on the new one ?

2-did you check the firmware modules ?
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 59 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group