MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 2
  [ 21 posts ]  Go to page 1, 2  Next
  Previous topic | Next topic 
Author Message
rafaela
 Post subject: Samsung SP2514N Platters Moter Stack
PostPosted: January 2nd, 2009, 7:05 
Offline
User avatar

Joined: February 1st, 2008, 17:01
Posts: 208
Location: Europe Greece
Model:Samsung SP2514N ,250GB ,7200,8M, PATA.
After the drive fallen down is from External Lacie Box the moter stack (like Seagate External Drive Cases).
The problem is how i can remove the platters from the drive , because i have 2 platters with one aluminum divider inside.
Take a look at below pics and you can understand

[img]http://rafaela.vsrcbd.com/IMG_0158.jpg
[/img]
[img]http://rafaela.vsrcbd.com/IMG_0159.jpg
[/img]
[img]http://rafaela.vsrcbd.com/IMG_0166.jpg
[/img]
The other way is to remove the moter (but until now i don't have that tool)
Thanks in advance

Xronis Kyriklakis

_________________
T3 Professional Data Recovery
http://www.t3-recovery.com
Top
 Profile  
 
thatdellguy
 Post subject: Re: Samsung SP2514N Platters Moter Stack
PostPosted: January 2nd, 2009, 7:19 
Offline
User avatar

Joined: August 19th, 2007, 17:30
Posts: 1898
Location: In your hard drive.
By opening it, you already contaminated the platters. You can see lots of dust and a possible finger print in the pics. Close it up and send it to a pro if its worth anything.

_________________
Buy your friends Toshiba\Hitachi and your enemies Seagate.
Top
 Profile  
 
rafaela
 Post subject: Re: Samsung SP2514N Platters Moter Stack
PostPosted: January 2nd, 2009, 8:09 
Offline
User avatar

Joined: February 1st, 2008, 17:01
Posts: 208
Location: Europe Greece
We are Pro and the drive is come all ready opened , left the dust and look the devide solution.

_________________
T3 Professional Data Recovery
http://www.t3-recovery.com
Top
 Profile  
 
BlackST
 Post subject: Re: Samsung SP2514N Platters Moter Stack
PostPosted: January 2nd, 2009, 8:20 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
I confirm : they are PROS.

Check MSN :D
Top
 Profile  
 
cryoborgofthevenus
 Post subject: Re: Samsung SP2514N Platters Moter Stack
PostPosted: January 2nd, 2009, 8:32 
Offline
User avatar

Joined: October 2nd, 2005, 0:30
Posts: 288
Location: Jakarta - Indonesia
This problem was encountered previously by sempre or other member of this forum (as I recall). The solution I can think of , is the same as handling Seagate multi platters with spacer, use SD platter extractor tool and modify a little and with some creativity to maintain the alignment of lower and upper cylinders.

_________________
My Forum
Top
 Profile  
 
rafaela
 Post subject: Re: Samsung SP2514N Platters Moter Stack
PostPosted: January 2nd, 2009, 8:49 
Offline
User avatar

Joined: February 1st, 2008, 17:01
Posts: 208
Location: Europe Greece
this is a good answer cryoborgofthevenus

_________________
T3 Professional Data Recovery
http://www.t3-recovery.com
Top
 Profile  
 
rafaela
 Post subject: Re: Samsung SP2514N Platters Moter Stack
PostPosted: January 2nd, 2009, 9:11 
Offline
User avatar

Joined: February 1st, 2008, 17:01
Posts: 208
Location: Europe Greece
Like "Horse" says Samsung want to give some pain in the ass, and in the ............ to DR specialists.

_________________
T3 Professional Data Recovery
http://www.t3-recovery.com
Top
 Profile  
 
pepe
 Post subject: Re: Samsung SP2514N Platters Moter Stack
PostPosted: January 2nd, 2009, 9:24 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4755
Location: Hungary
U can also remove the platters one by one and realign them in the new chassis, but this is very hard to do.
I have developed a much better solution than the SD toolset but I won't disclose it on an open forum of course.

pepe

_________________
Adatmentés - Data recovery
Top
 Profile  
 
BlackST
 Post subject: Re: Samsung SP2514N Platters Moter Stack
PostPosted: January 2nd, 2009, 9:32 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
That's what I told him. Difficult but not impossible, for me usually works.
Top
 Profile  
 
pepe
 Post subject: Re: Samsung SP2514N Platters Moter Stack
PostPosted: January 2nd, 2009, 9:37 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4755
Location: Hungary
needs some patience :) and time...
that's why I chose to figure out something else.

pepe

_________________
Adatmentés - Data recovery
Top
 Profile  
 
Doomer
 Post subject: Re: Samsung SP2514N Platters Moter Stack
PostPosted: January 2nd, 2009, 14:09 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago
From my experience Samsungs of that model are easy even with platters transplant
If you are a pro you should know how to deal with drives with separators
But apparently you are not

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
shahij
 Post subject: Re: Samsung SP2514N Platters Moter Stack
PostPosted: January 2nd, 2009, 14:25 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1052
Location: Bangladesh
Doomer wrote:
From my experience Samsungs of that model are easy even with platters transplant
If you are a pro you should know how to deal with drives with separators
But apparently you are not


2 platters could not be extracted at a time to the drive. thats why, mis alignment is seems going on. Its a complex case, not easy.

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com
Top
 Profile  
 
Doomer
 Post subject: Re: Samsung SP2514N Platters Moter Stack
PostPosted: January 2nd, 2009, 14:47 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago
shahij wrote:
2 platters could not be extracted at a time to the drive.

Wanna bet?

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
Doomer
 Post subject: Re: Samsung SP2514N Platters Moter Stack
PostPosted: January 2nd, 2009, 14:48 
Offline
User avatar

Joined: September 29th, 2005, 12:02
Posts: 3577
Location: Chicago
shahij wrote:
Its a complex case, not easy.

If you say so

_________________
SAN, NAS, RAID, Server, and HDD Data Recovery.
Top
 Profile  
 
BlackST
 Post subject: Re: Samsung SP2514N Platters Moter Stack
PostPosted: January 2nd, 2009, 15:16 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
Shahij... even 4 platters CAN be extracted together without loosing alignment.... of course it depends on the tool and on who is doing the job. Trust me ;)
Top
 Profile  
 
networkpc3000
 Post subject: Re: Samsung SP2514N Platters Moter Stack
PostPosted: January 2nd, 2009, 16:01 
Offline
User avatar

Joined: December 16th, 2007, 10:26
Posts: 1151
agree this way, well answer, and it need patience to do it. every problem using easy way to solve, don't think more. that was PRO DR
pepe wrote:
U can also remove the platters one by one and realign them in the new chassis,

pepe

_________________
data recovery service[/b]
Top
 Profile  
 
rafaela
 Post subject: Re: Samsung SP2514N Platters Moter Stack
PostPosted: January 2nd, 2009, 16:36 
Offline
User avatar

Joined: February 1st, 2008, 17:01
Posts: 208
Location: Europe Greece
From my experience Samsungs of that model are easy even with platters transplant
If you are a pro you should know how to deal with drives with separators
But apparently you are not

_________________
My hobby is numismatics - http://coins.zoxt.net/

Doomer from now on we can learn from you Pro + Class

_________________
T3 Professional Data Recovery
http://www.t3-recovery.com
Top
 Profile  
 
shahij
 Post subject: Re: Samsung SP2514N Platters Moter Stack
PostPosted: January 3rd, 2009, 3:26 
Offline

Joined: March 11th, 2008, 4:35
Posts: 1052
Location: Bangladesh
BlackST wrote:
Shahij... even 4 platters CAN be extracted together without loosing alignment.... of course it depends on the tool and on who is doing the job. Trust me ;)


Ya, agree.
But, I m telling about the specific drive where divider (aluminium) is placed between platters. Please re look on the drive pictures.

http://rafaela.vsrcbd.com/IMG_0158.jpg

http://rafaela.vsrcbd.com/IMG_0159.jpg

http://rafaela.vsrcbd.com/IMG_0166.jpg

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com
Top
 Profile  
 
cryoborgofthevenus
 Post subject: Re: Samsung SP2514N Platters Moter Stack
PostPosted: January 3rd, 2009, 4:05 
Offline
User avatar

Joined: October 2nd, 2005, 0:30
Posts: 288
Location: Jakarta - Indonesia
@shahij :

First, Imagine the drive without the aluminium divider. Now extracting those platters become easy.... :D

How ? You will figure it out, friend.

_________________
My Forum
Top
 Profile  
 
BlackST
 Post subject: Re: Samsung SP2514N Platters Moter Stack
PostPosted: January 3rd, 2009, 4:31 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
Already given to whom it concerns details on what to do... Let's go back to our cleanrooms, guys ! !
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 21 posts ]  Go to page 1, 2  Next

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 47 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group