Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
January 28th, 2009, 9:57
Hi.
I need to unlock a Hitachi drive thats is supported in the firmware update cd in the downloads section. It doesn't update because (I think) it has the current firmware is up to date. Can I force the update? And with this, it will unlock?
Very greetings.
Rodrigo
January 28th, 2009, 10:08
No, you hdd isn't a mobile phone or DVD-ROM.
You cannot simply "flash" the fw, you need specialist equipment costing $1,000's
January 28th, 2009, 15:00
I can unlock, but you have to send it in.
January 29th, 2009, 5:44
So can I, but I'm guessing he wants it done for free!
January 29th, 2009, 8:35
My service is free, you have to pay my time.
January 29th, 2009, 14:07
@PCIMAGE... does A-FF do the job ? If supported, maybe he can try online unlock, it's gonna cost about 50 / 70$ if I recall right.
Unless $50 / 70 are too much.
January 29th, 2009, 15:39
Not unless he is able to download 'probes'.
January 29th, 2009, 16:01
@BlackST..
HDD Spaz is right, "probes" are required for unlocking with PC3000.
Or there is another method using Factory mode, but that involves removing the PCB and other stuff.
Either way it's certainly gonna cost much more than the $40-50 a new drive would cost.
January 29th, 2009, 16:16
probe + pc3000 = 50 $ ?
January 29th, 2009, 16:25
January 29th, 2009, 22:00
Never used any 'probes' to remove password from such drives
That's why commercial products are bad - they put your mind into the box and you stop thinking
January 29th, 2009, 23:59
Bravo!
January 30th, 2009, 4:35
@Doomer...
Yes, I must admit we don't get many password locked Hitachi HDD's in nowadays, and we did used to use probes with PC3000 to unlock them. Now we simply overwrite the SA-A copy of the security module with the factory one from SA-C. This of course involves changing the NVRAM on the PCB to make it into "Safe Mode".
January 30th, 2009, 6:38
pcimage wrote:@Doomer...
Yes, I must admit we don't get many password locked Hitachi HDD's in nowadays, and we did used to use probes with PC3000 to unlock them. Now we simply overwrite the SA-A copy of the security module with the factory one from SA-C. This of course involves changing the NVRAM on the PCB to make it into "Safe Mode".

Someone has been doing their homework! Thats what I do to.
January 30th, 2009, 8:47
What's worst, I can do this without tools
PM ME FOR A FINAL SPECIAL "HDDGURU" OFFER... this thread must end
January 30th, 2009, 11:05
Whats this?
BlackST having a "January Sale"??
ALL STOCK MUST GO!
Powered by phpBB © phpBB Group.