MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Previous topic | Next topic 
Author Message
Archive_mfast
 Post subject:
PostPosted: April 15th, 2004, 6:17 
Offline

Joined: November 24th, 2003, 12:59
Posts: 31
Location: South Africa
MHN2100AT 810-7255 - arrived making slight click,scratch - no detection.

found following modules faulty :

In HDA: 07SI, 29SH, 2DFA
In RAM: 01DM, 03TS, 07SI, 0CSM, 0DSU, 2DFA, 32WE

Found 029SH either not used or not readable in other good MHN drives.

Well, it was easy to write necessary modules and drive detects - all correct.
Used good modules from MHN2100AT 910-7255

Also read a module 21h - 33.m with FJT ??? who is this ??

Now the reading of blocks is very, very slow - but reads.
Adapatives ??

Any ideas or suggestions would be much appreciated.


btw. 03TS does not report correctly, but found this to be the case with good working drives.
Top
 Profile  
 
Archive_Mikestor
 Post subject:
PostPosted: April 16th, 2004, 8:29 
Offline

Joined: March 15th, 2004, 16:47
Posts: 11
Location: Ireland
what software did you use to read from 2.5 " IDE drives?
Top
 Profile  
 
Archive_Carlos Cantero
 Post subject:
PostPosted: April 16th, 2004, 13:22 
Offline

Joined: June 25th, 2003, 18:01
Posts: 21
Location: Madrid/Spain
Using ATA commands
Top
 Profile  
 
Archive_-=pc3krules=-
 Post subject:
PostPosted: April 16th, 2004, 20:36 
Offline

Joined: April 2nd, 2004, 0:00
Posts: 16
Location: Brazil
To mfast or carlos cantero,

Any of you guys care to explain me - and maybe mikestor too :) -

How can you diagnose a 2.5" hdd firmware??. If it is a program, please name it, if it is by the use of ata commands, give us some light

Any help will be welcome

(PS- To Carlos cantero: i haven't private mailed you yet, but feel free to PM me as i want to exchange information, not just ask for it - i have a good rom/ldr/module database, good experence with maxtor / fujitsu and i am a begginer in quantum / wd / ibm firmware issues). I really do not know nothing about 2.5" hdd firmware restoration.

Regards to all of you,

-=pc3krules=-
Top
 Profile  
 
Archive_mfast
 Post subject:
PostPosted: April 19th, 2004, 15:58 
Offline

Joined: November 24th, 2003, 12:59
Posts: 31
Location: South Africa
Well I found the solution, no thanks to anyone.

I can say it was not adaptives, which were matched :;):

It seems that questions outnumber answers 10:1 here.

So goodbye all I am outa here for good.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 222 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group