View topic - Problems with my hitachi hard drive

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Problems with my hitachi hard drive

Page 1 of 1

[ 9 posts ]

Previous topic | Next topic

Author

Message

christianeitor

Post subject: Problems with my hitachi hard drive

Posted: April 25th, 2008, 14:45

Joined: April 25th, 2008, 14:28
Posts: 2

I have the following hard disk drive

HITACHI
MODEL :HDT722525DLAT80 (ATA)
250 GB
7200 RPM
IDE/ATA

and my problem is :

I have a HDT722525DLAT80 (ATA) and its PCB doesn't work, I've tried to buy the same hard disk drive in order to use the PCB from the new HDD in the old HDD for recovering my stored information using the PCB of the new HDT722525DLAT80 (ATA) in the old HDT722525DLAT80 (ATA), but the product is not available in the market, In other way I found the HDT722525DLA380 (SATA) available in the market for sale and I'm not sure if the PCB of the HDT722525DLA380 (SATA) will work in the HDT722525DLAT80 (ATA), the main reason... is to recover my information storaged in the HDT722525DLAT80 (ATA) which its PCB is damaged

somebody who can help me ?

Regards

Christian

Top

Cyclone89

Post subject: Re: Problems with my hitachi hard drive

Posted: March 17th, 2009, 9:53

Joined: March 17th, 2009, 9:49
Posts: 2
Location: United States

I have the same issue exactly. If anyone has an answer it would greatly appreciated. I have alot of personally valuable info on this drive.

Top

BlackST

Post subject: Re: Problems with my hitachi hard drive

Posted: March 17th, 2009, 10:05

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY

The PCB is UNIQUE for each drive.

Top

Cyclone89

Post subject: Re: Problems with my hitachi hard drive

Posted: March 17th, 2009, 10:11

Joined: March 17th, 2009, 9:49
Posts: 2
Location: United States

So do I go to the USB enclsoure mfr to get the PCB? In this case Iomega?

Top

Russwinters

Post subject: Re: Problems with my hitachi hard drive

Posted: March 17th, 2009, 11:38

Joined: July 16th, 2008, 17:52
Posts: 489
Location: Long Beach, California

If the data is valuable I suggest you send it to a pro; this type of job shouln't be outrageously expensive. Unless you tamper with the drive alot first.

Top

BGman

Post subject: Re: Problems with my hitachi hard drive

Posted: March 18th, 2009, 7:22

Joined: September 30th, 2005, 7:33
Posts: 849

BlackST wrote:

The PCB is UNIQUE for each drive.

Not true for this particular drive family.
Check the label on the PCB. If the first two lines are identical you can swap the PCB's.

Top

pcimage

Post subject: Re: Problems with my hitachi hard drive

Posted: March 18th, 2009, 9:18

Joined: November 29th, 2006, 10:08
Posts: 7865
Location: UK

BGman wrote:

BlackST wrote:

The PCB is UNIQUE for each drive.

Not true for this particular drive family.
Check the label on the PCB. If the first two lines are identical you can swap the PCB's.

What about the NVRAM?

Sure, the PCB's are electronically the same, but the NVRAM is very likely to differ.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

hddguy

Post subject: Re: Problems with my hitachi hard drive

Posted: March 18th, 2009, 9:25

Joined: November 9th, 2006, 15:15
Posts: 2984

I have had success in the past with swapping PCBs with no NVRAM transfer, but only on IBM never with hitachi...

Top

HDD Spaz

Post subject: Re: Problems with my hitachi hard drive

Posted: March 18th, 2009, 10:21

Joined: October 13th, 2008, 7:29
Posts: 1493

I'm quite sure I have swapped these in the past without rom swap but you have to be very very lucky to get a match. Much like Western Digital drives.

Top

Page 1 of 1

[ 9 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 67 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum