Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
March 13th, 2009, 19:58
Hi gurus!
How to backup a hdd firmware?
How to backup the LBA zone with bad sectors?
Thanks
March 15th, 2009, 6:32
Even if we tell you the procedure you would need special equipment to perform read/write operations on firmware like pc3000.
March 15th, 2009, 9:12
Thanks for your answer!
I have another problem.
When I set the safe mode on Maxtor DM+8 (lower two pins short near 40 pin '_::)
the platter spins up. Is it correct?
Maybe just the head not moving...
March 15th, 2009, 9:16
The situation is the same on other motherboard, and with another DM+9.
March 15th, 2009, 16:48
If you put maxtor in safe, the platers should not spin.
March 15th, 2009, 17:43
Thanks trubarevacki!
I think also. Are my jupmer settings wrong?
Or the PCB? Both?
April 11th, 2009, 10:48
Hi Spildit!
It is just a link for cloning methods .
The safe mode is another theme. Maybe OFF.
But, really thanks for your post.
Powered by phpBB © phpBB Group.