MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 
  Previous topic | Next topic 
Author Message
nricca
 Post subject: wanted: PCB for Fujitsu MHT2030AT
PostPosted: May 5th, 2009, 4:51 
Offline

Joined: May 5th, 2009, 4:35
Posts: 5
Location: Munich
Hi,

I´m looking for a PCB that matches this HDD.

Please see attached photo of sticker.

Thank you very much.

Ric


Attachments:
2.png
2.png [ 225.37 KiB | Viewed 9271 times ]
Top
 Profile  
 
dobrevjetser
 Post subject: Re: wanted: PCB for Fujitsu MHT2030AT
PostPosted: May 5th, 2009, 4:53 
Offline

Joined: December 27th, 2006, 10:15
Posts: 1852
Location: Belgium
Why do you think its the pcb ?

Dobre

_________________
Murphy was an optimist

Datarecovery in Belgium, Holland, France and Germany
Datarecoverytools http://www.drtools.eu
Top
 Profile  
 
nricca
 Post subject: Re: wanted: PCB for Fujitsu MHT2030AT
PostPosted: May 5th, 2009, 5:29 
Offline

Joined: May 5th, 2009, 4:35
Posts: 5
Location: Munich
Hi,

because this Fujitsu HDD has been connected to a pc with this adapter for 2.5" to 3.5" HDD:

http://www.cartft.com/catalog/il/441

but in the wrong way (power connection on the wrong side).

After this, the HDD was dead.

It should be enough to replace the PCB, isn´t it?

Thank you for any advice.

Ric
Top
 Profile  
 
Zero Alpha
 Post subject: Re: wanted: PCB for Fujitsu MHT2030AT
PostPosted: May 5th, 2009, 6:06 
Offline
User avatar

Joined: April 7th, 2009, 21:36
Posts: 487
you may get away with repairing the pcb... tvs...

_________________
Zero Alpha: zeroalpha.com.au
Find Cheap Donor Drives App: https://www.zeroalpha.com.au/donor-drive-app Updated February 2026
Top
 Profile  
 
BlackST
 Post subject: Re: wanted: PCB for Fujitsu MHT2030AT
PostPosted: May 5th, 2009, 7:21 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
Uhm... I think the pcb is beyond repair... :D
Top
 Profile  
 
nricca
 Post subject: Re: wanted: PCB for Fujitsu MHT2030AT
PostPosted: May 5th, 2009, 7:26 
Offline

Joined: May 5th, 2009, 4:35
Posts: 5
Location: Munich
Zero Alpha wrote:
you may get away with repairing the pcb... tvs...


Mhm, how can I repair it? There is no visible damage.
Top
 Profile  
 
pcimage
 Post subject: Re: wanted: PCB for Fujitsu MHT2030AT
PostPosted: May 5th, 2009, 7:55 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
Check the fuse.

If not I can supply you a PCB for this.

PM me if interested.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
nricca
 Post subject: Re: wanted: PCB for Fujitsu MHT2030AT
PostPosted: May 5th, 2009, 17:11 
Offline

Joined: May 5th, 2009, 4:35
Posts: 5
Location: Munich
pcimage wrote:
Check the fuse.

If not I can supply you a PCB for this.

PM me if interested.



Hi,

how do I check the fuse? Where can I find it?

Thank you,

Ric
Top
 Profile  
 
pcimage
 Post subject: Re: wanted: PCB for Fujitsu MHT2030AT
PostPosted: May 5th, 2009, 17:27 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
Post a hi-res of the PCB (component side)

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
nricca
 Post subject: Re: wanted: PCB for Fujitsu MHT2030AT
PostPosted: May 6th, 2009, 3:22 
Offline

Joined: May 5th, 2009, 4:35
Posts: 5
Location: Munich
Hs,

here´s the pic.

Ric.


Attachments:
DSCN0398_50.JPG
DSCN0398_50.JPG [ 234.53 KiB | Viewed 9314 times ]
Top
 Profile  
 
pcimage
 Post subject: Re: wanted: PCB for Fujitsu MHT2030AT
PostPosted: May 6th, 2009, 3:34 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
The fuse is top left, marked with an "N".

Use a multimeter to check continuity, it should be closed.

If it's open, either replace it or bridge it.

If that doesn't work right away, then switch it off quickly, you need a new PCB.

If it does happen to work then copy off your data QUICKLY! This should be considered a temporary fix only, as the drive is no longer protected.

Good luck!

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
pepe
 Post subject: Re: wanted: PCB for Fujitsu MHT2030AT
PostPosted: May 11th, 2009, 14:58 
Offline

Joined: October 3rd, 2005, 0:40
Posts: 4753
Location: Hungary
He connected the adapter reversed. That means the power was fed to some port bit lines and GND... those lines are dead, and the processor could be also. It is hardly a fuse problem.


pepe

_________________
Adatmentés - Data recovery
Top
 Profile  
 
jason2982
 Post subject: Re: wanted: PCB for Fujitsu MHT2030AT
PostPosted: July 8th, 2012, 2:29 
Offline

Joined: July 8th, 2012, 2:10
Posts: 4
Location: mexico
pcimage wrote:
The fuse is top left, marked with an "N".

Use a multimeter to check continuity, it should be closed.

If it's open, either replace it or bridge it.

If that doesn't work right away, then switch it off quickly, you need a new PCB.

If it does happen to work then copy off your data QUICKLY! This should be considered a temporary fix only, as the drive is no longer protected.

Good luck!


I just register to say... THANKS!!! I know this thread has long time... but you just safe my life, I made the same mistake, I just bridge the fuse and i´m able to recover my info, thanks a lot... really!!! :D :D :D :D :D :D
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 28 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group