Seagate Barracuda 7200.12

[wisitrrr]

i have Seagate Barracuda ST3500418AS
Firmware CC34
Site code Wu
It not Appear in Bios.
Did any one know How to Change Circuit to make HDD Working.

Here is the Harddisk DATa
Seagate ST3500418AS
F/W CC34
Date Code 09345
Site Code WU (CHina)
the label on Circuit is 2364 F

I replace with
ST3500418 AS
F/W CC34
Date Code 09345
Site Code Wu (CHina)
but label on Curcuit is 2364E

But it Still not appear on bios

[HDD Spaz]

what exactly is the disk doing when powered? Changing the circuit board will not help you.

[beto]

If u Disk its not showed at BIOS or show´s LBA on 0 its a SA problem ,wich cannot be repaired exchanging PCB its a problem on "engineering tracks"

Regards

[harddrivespecialist]

Did you try swapping platters?
I believe its a 2nd most popular thing people do after PCB swap.

[guru]

did you swap flash (AKA ROM) ?

[drc]

OOH are these having LBA 0 issues too???

[HDD Spaz]

I hope so. I'm now rubbing my hands with glee

[wmcapuno]

I am also experiencing the problem you are having with your harddisk. I am also using the same harddisk.

[BlackST]

Of course they have...

[zebong]

If not appear in BIOS, and you dont tell-us if the model appear at all or just show 0MB in Bios ?

maybe it could have two Problems.
- SA
- Head Problem ( if the disk was drop)

ZeBong

[Smart302]

I also want to know, this kind of breaks down I see a lot of