SAMSUNG HM160HI

[sempre]

Hi to all!!

Please infos:
1) how to reach the FW of this model? It saw terminal? (PC3K PCI 2.21, 2.27)
2)OR using some tool free?

Hd is only busy and to reset it saw software is:
DRSC DRDY AMNF

when trying to recognize the model (F2 MHDD)
ERR WRFT DRDY ABRT

Thanks advanced!!

[rameez]

What it show in terminal ?

[sempre]

What it show in terminal ?

Help?

[BlackST]

Post the terminal log ... (what you see in terminal)

[sempre]

Post the terminal log ... (what you see in terminal)

Sorry, After many attempts do not emit none log!
No clikclking.
spin off.

[pepe]

U mean it does not spin, and neither does output anything in terminal?
Probably the pcb is damaged, I would check TVSs and fuses first, then other supply voltages on the PCB.

pepe

[sempre]

U mean it does not spin, and neither does output anything in terminal?
Probably the pcb is damaged, I would check TVSs and fuses first, then other supply voltages on the PCB.

pepe

Hi pepe!!

Hdd binds has rpm, makes some movements in the arms and after some seconds spin off.
Thanks!!

[pepe]

What's output on the terminal?

[rameez]

Try giving it soft reset then try ID again .

[jono-ats]

The terminal connector is the same as for Seagate SATA, except that Transmit and Reverse are swapped.