MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: slow sectors .. how can I isolate them
PostPosted: October 11th, 2009, 20:29 
Offline

Joined: October 11th, 2009, 19:17
Posts: 3
Location: amman - jordan
(sorry for my english if it's bad)

Hello,
Please help me cuz I'm gonna throw this 160gb hitachi HDD out the window
is there any utility I can use to determine and isolate the slow sectors (that are not considered as bad sectors by chkdsk /r and similar utilities) depending on the access time to the sectors
for example: I want every sector with access time above 50ms to be considered as unusable so nothing will be stored in that sector in the future

I tried chkdsk /r and other disk utilities that I can see them come through these very slow sectors during the check but in the end I get the congratulation message telling me there are no bad sectors ..
I really need ur help .. I don't wanna keep wasting time downloading big files then find them corrupted

I heard about MHDD .. can MHDD do this job .. if yes .. how can I perform this check (what is the command line) and how can I adjust the sector access time that if exceeded the sector must be treated as bad sector and get isolated

Thanks


Top
 Profile  
 
 Post subject: Re: slow sectors .. how can I isolate them
PostPosted: October 11th, 2009, 21:10 
Offline

Joined: March 15th, 2007, 0:04
Posts: 9
I am a Chinese data recovery staff, good English proficiency. Probably know you need this version of the MHDD :D


Attachments:
MHDD.rar [98.43 KiB]
Downloaded 657 times
Top
 Profile  
 
 Post subject: Re: slow sectors .. how can I isolate them
PostPosted: October 12th, 2009, 7:04 
Offline
User avatar

Joined: April 7th, 2009, 21:36
Posts: 487
Would it not be cheaper and easier to buy a new one?

_________________
Zero Alpha: zeroalpha.com.au
Find Cheap Donor Drives App: https://www.zeroalpha.com.au/donor-drive-app Updated February 2026


Top
 Profile  
 
 Post subject: Re: slow sectors .. how can I isolate them
PostPosted: October 13th, 2009, 8:54 
Offline

Joined: October 11th, 2009, 19:17
Posts: 3
Location: amman - jordan
Thank u guys
ok I've erased the HDD (MHDD --> ERASE command)
then I made a little modification in MHDD.CFG and reduced the ERASEWAITSDELAY from 350ms to 50ms

now if I want to isolate (or delete or kill) sectors having access time above 50ms
I think I must run SCAN command with Erase Delays(DESTRUCTIVE):ON
then run SCAN again with REMAP:ON
so these sectors will be marked us unusable
am I right ?

Q: if I format the HDD using windows vista setup dvd after doing the above MHDD tasks, does it make the bad sectors usable again ?

sorry for my quistions .. i'm a civil engineer actually and don't have much information about these technologies

Thnks


Top
 Profile  
 
 Post subject: Re: slow sectors .. how can I isolate them
PostPosted: October 13th, 2009, 9:46 
Offline

Joined: October 11th, 2009, 19:17
Posts: 3
Location: amman - jordan
Quote:
Q: if I format the HDD using windows vista setup dvd after doing the above MHDD tasks, does it make the bad sectors usable again ?

please note when I say (usable) I mean storing data on these bad sectors.. not repairing them (I know they are unrepairable)


Top
 Profile  
 
 Post subject: Re: slow sectors .. how can I isolate them
PostPosted: October 18th, 2009, 11:30 
Offline

Joined: September 3rd, 2009, 17:38
Posts: 17
Location: indonesia
hi
you want data or not


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 50 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group