Got a Hard Disk Sansung HD502HI model now being detected as HD102UJ, to the software ESTOOLS sansung can not put it in normal size, and assessments are lives

I have this in the terminal, aid are welcome


PSL

++ SU
MaxPhyHead = 0006
RPM at Handoff: 0232
§UtSHOS - Released on 2009/04/20 16
:48 by sangyun.jung
DRAM=16MB SoC=26A3
SHOS-(1AG18f4M.114)
<SpinOn_2>KeepSpinOn!
RV Enabled
Temp : 33 degC
SpinOk
SK C:121817 H:0
ServoTable Loaded
| 6 | CONFIG | 0 | 0 | 89 | 1140 |
| 6 | CONFIG | 0 | 1 | 89 | 1140 |
| 6 | CONFIG | 45 | 0 | 89 | 1140 |
| 6 | CONFIG | 45 | 1 | 89 | 1140 |
FdtTable Loaded
| 19 | RLIST | 3 | 0 | 66 | 1140 |
| 19 | RLIST | 3 | 1 | 66 | 1140 |
Hd: 0 Zn: 0 Avg.:- 237
Hd: 0 Zn: 1 Avg.: 53
PASS
| 147 | IN_SITU | 17 | 0 | 136 | 1140 |
| 147 | IN_SITU | 17 | 1 | 136 | 1140 |
>>Insitu: MC rd fail
| 22 | SECURITY | 3 | 0 | 143 | B98B |
| 22 | SECURITY | 3 | 1 | 143 | B98B |
| 159 | DCO | 34 | 0 | 0 | B98B |
| 159 | DCO | 34 | 1 | 0 | B98B |
| 253 | ZONEHEAL | 48 | 0 | 0 | 1140 |
| 253 | ZONEHEAL | 48 | 1 | 0 | 1140 |
rb(e1140 48 0 0 490)
rb(e1140 48 0 0 490)
rb(e1140 48 1 0 490)
rb(e1140 48 1 0 490)
W-MC e(00001140) (48: 2: 0)
rb(e1140 48 0 0 490)
rb(e1140 48 0 0 490)
rb(e1140 48 1 0 490)
rb(e1140 48 1 0 490)
W-MC e(00001140) (48: 2: 0)
InitAHPSL

++ SU
MaxPhyHead = 0006
SpinBrake
PSL

++ SU
MaxPhyHead = 0006
PSL

++ SU
MaxPhyH
ead = 0006
SpinBrake
PSL

++ SU
MaxPhyHead = 0006
RPM at Handoff: 0807