Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

How to kill 7200.11 disk using ATA commands

December 11th, 2009, 7:00

Hello friends

I want to give my 1Tb disk to seagate for RMA , which has bad sectors. generally local support is equiped with seagate repair tools so they refurbish it and return same disk.
I want to make disk non detectable so that i will get new disk.Can someone suggest few commands to crash firmware and make it dead forever?

Re: How to kill 7200.11 disk using ATA commands

December 11th, 2009, 7:12

I am sure Seagate will be able to tell difference between generic HDD failure, and malicious damage.

I am sure your HDD will be replaced with new HDD, and not refurbished to you.

Re: How to kill 7200.11 disk using ATA commands

December 11th, 2009, 7:59

hddguy wrote:I am sure Seagate will be able to tell difference between generic HDD failure, and malicious damage.

I am sure your HDD will be replaced with new HDD, and not refurbished to you.


I dont think seagate has time to check each and every failed disk. Besides its my right to get product replaced rather to get refurbed.

Re: How to kill 7200.11 disk using ATA commands

December 11th, 2009, 8:08

you can use a hammer and click it when the disk is spining.

bye bye disk :mrgreen:

or you can drop it when he is spining.

so many ways .... just think .

Re: How to kill 7200.11 disk using ATA commands

December 11th, 2009, 11:18

You will get refurbished disk as RMA one. And it will not be the same drive you sent

Re: How to kill 7200.11 disk using ATA commands

December 11th, 2009, 20:41

After careful analysis of posts on this forum, it seems that the following command will eventually cause 7200.11 to die:

READ DMA

Re: How to kill 7200.11 disk using ATA commands

December 11th, 2009, 22:27

I see what you did there

Re: How to kill 7200.11 disk using ATA commands

December 12th, 2009, 0:54

Doomer wrote:You will get refurbished disk as RMA one. And it will not be the same drive you sent


Hi doomer seagate has given some equipments to there service franschise here in india , that machine can remap bad sectors so instead of replacement they give same disk.

Re: How to kill 7200.11 disk using ATA commands

December 12th, 2009, 6:49

Seagate giving away MHDD for free? how nice of them. lol

Re: How to kill 7200.11 disk using ATA commands

December 12th, 2009, 14:41

chipsang wrote:Hi doomer seagate has given some equipments to there service franschise here in india , that machine can remap bad sectors so instead of replacement they give same disk.

doesn't really sound like RMA process to me

Re: How to kill 7200.11 disk using ATA commands

December 14th, 2009, 15:07

Well that does happen when logistics require it. If your living in Uganda and need your drive RMA'd your likely to be the only person in Uganda with a Seagate hard drive :lol: so you will get the same one back... Seagate/Samsung/Toshiba service each main area but smaller countries are self sufficient with a small franchised service cntr IMHO

Re: How to kill 7200.11 disk using ATA commands

December 14th, 2009, 15:12

Seagate advisory regarding the 7200.11 Brinks Desktop etc....
Attachments
seagate.pdf
(38.48 KiB) Downloaded 1269 times
Post a reply