Sansung HD161HJ PROBLEM

Data recovery and HDD repair discussions

Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply
harddisk
  • harddisk
  • Posts: 56
  • Joined: October 21st, 2008, 19:24

Sansung HD161HJ PROBLEM

January 4th, 2010, 8:39

Hello I have this in the terminal sansung HD model 161HJ/SRO hard disk seems to go into standby always busy more suggestions are welcome, I thank you

SPW 0000 NoLk
5V: 04940
SpnOk
spd: 0000 0000 0000
H: +00000
ADC: FFFD
DAC: 9D93
SK C: 00019AAC
ENG>SRV>
SvoTbl Loaded
CL B0B6 CM AC97 SL 31BE SM 34A4
BD

FdtTbl Loaded
pepe
  • pepe
  • Posts: 4755
  • Joined: October 3rd, 2005, 0:40
  • Location: Hungary
  • Website

Re: Sansung HD161HJ PROBLEM

January 4th, 2010, 10:40

Are you sure the pcb is original?

It seems that PCB is not native and not matching the FW on the platters.

pepe
harddisk
  • harddisk
  • Posts: 56
  • Joined: October 21st, 2008, 19:24

Re: Sansung HD161HJ PROBLEM

January 4th, 2010, 11:15

Not Pepe the PCB is ok, tested PCBs in other hard disk and it worked perfectly, any help is welcome. thaks
pepe
  • pepe
  • Posts: 4755
  • Joined: October 3rd, 2005, 0:40
  • Location: Hungary
  • Website

Re: Sansung HD161HJ PROBLEM

January 4th, 2010, 11:35

I did not say it is damaged, just that it might be not the original one....

pepe
networkpc3000

Re: Sansung HD161HJ PROBLEM

January 5th, 2010, 0:02

harddisk wrote:Not Pepe the PCB is ok, tested PCBs in other hard disk and it worked perfectly, any help is welcome. thaks

don't understand what pep mention at all 8) and have you try hot swap?
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

Board index