72001.11 ST31000333AS LBA=0 spindown after m0,2,2,0,0,0,0,22

Data recovery and HDD repair discussions

Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply
z007
  • z007
  • Posts: 48
  • Joined: January 25th, 2008, 1:57
  • Website

72001.11 ST31000333AS LBA=0 spindown after m0,2,2,0,0,0,0,22

February 26th, 2011, 5:15

Rst 0x20M
ASCII Diag mode

F3 T>i4,1,22

F3 T>/1

F3 1>N1

F3 1>/2

F3 2>Z

Spin Down Complete
Elapsed Time 10.595 secs
F3 2>U

Spin Up Complete
Elapsed Time 8.770 secs
F3 2>
ASCII Diag mode

F3 T>m0,2,2,0,0,0,0,22 (then it spin down ,why ? how to do ? HDDguru
einstein9

Re: 72001.11 ST31000333AS LBA=0 spindown after m0,2,2,0,0,0,0,22

March 6th, 2011, 3:11

what was the problem with ur drive?
rameez
  • rameez
  • Posts: 2288
  • Joined: June 27th, 2006, 11:33
  • Location: In ur HDD !

Re: 72001.11 ST31000333AS LBA=0 spindown after m0,2,2,0,0,0,0,22

March 6th, 2011, 3:39

you should wait sometimes this command takes time .
Russwinters
  • Russwinters
  • Posts: 489
  • Joined: July 16th, 2008, 17:52
  • Location: Long Beach, California
  • Website

Re: 72001.11 ST31000333AS LBA=0 spindown after m0,2,2,0,0,0,0,22

March 7th, 2011, 12:52

I have seen certain revisions spin down, just walk away for a while and come back.
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

Board index