Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
January 21st, 2010, 17:41
Here is an audio file of what my hard drive sounds like.
http://home.comcast.net/~jeff_and_karin/audio/hd.wmaIt is a WD1600JS-00MHB0. I accidentally connected both sata and legacy power. Also possible that power supply failed.
Removed PCB and cleaned connections. Nothing looks burnt.
Any help would be appreciated.
January 22nd, 2010, 0:02
That sounds like head sticktion or spindle problems need to be checked on a clean room i would check spindle phases too , if u dont know how to did that, u know answers
January 22nd, 2010, 20:43
i don't think had to open it for process. i have meet one case like it before.
January 22nd, 2010, 21:02
awwwww. this doesn't sound good...
If you don't need the data, then RMA the drive but if you want to recover the data, send it in to a data center for the diagnostic and estimate!! Most places provide the free diagnostic.
Good Luck!!!
Powered by phpBB © phpBB Group.