View topic - ST3250310NS HPG1 FIRMWARE PROBLEM

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

ST3250310NS HPG1 FIRMWARE PROBLEM

Page 1 of 1

[ 3 posts ]

Previous topic | Next topic

Author

Message

AOnD

Post subject: ST3250310NS HPG1 FIRMWARE PROBLEM

Posted: January 21st, 2010, 13:55

Joined: September 15th, 2009, 7:19
Posts: 21
Location: Madrid

Hello everybody!

I've tried everything, I was reading all the post about it and I couldn't repair this hdd: GB0250C8045, ST3150310NS, P/N: 9CA152-783, HPG1

I follow the tipical procedure for this hdd, ES.2. Without insolation, PCB and hdd, I did the short-circuit when I'm in the terminal, then I turn on and off the Hdd and the CTRL+Z and apear F3 T>
then /2 and Z. and then instead of LED 00000000CC apear LED 000000CE.

Why??

Thanks!!!

Top

poehere

Post subject: Re: ST3250310NS HPG1 FIRMWARE PROBLEM

Posted: January 23rd, 2010, 19:39

Joined: February 27th, 2009, 3:26
Posts: 1721
Location: French Polynesia Tahiti

This could be beyond your scope to repair this drive. You should check in your area for a good DR shop and take it there to have them do this one for you. Should not be too much to have this done and might save your drive and data to have an expert do this one for you.

_________________
Iorana Haraharaini

Top

pcimage

Post subject: Re: ST3250310NS HPG1 FIRMWARE PROBLEM

Posted: January 24th, 2010, 5:31

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK

poehere is correct

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Top

Page 1 of 1

[ 3 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 96 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum