I keep ending up with multiple drive failures on my server. Configured -RAID 6, 1 TB WD disks
Array controller ( P800 ), hdd - all updated to latest fw versions.

The adu log says



Looks like the drives were failed because the drive aborted a command 'n' times. This is why the failure reason is 0x0E .

ALso hooked up a serial cable to the array controller and this is what the trace point says



Can anyone shed some more light on this???

Secondly,Is there any way I can get some low level info on these failures from /proc/... or some else from the kernel level?

Adu report attached

Cheers
David