WD10EADS-00L5B1 Fried PCB

[Skizoboy]

Hello,

I have a WD10EADS hard drive that has been plugged upside down to a molex connector with an adapter.
The PCB is fried ( http://grab.by/3Q5v http://grab.by/3Q5E) and I'd like to get the data back if possible.

I'v read a lot in here today, I know swapping PCBs won't help and some soldering is required.

Networkpc3000 proposed his services but I live in Europe and shipping my hard drive to China would cost me more than the servicing itself.

Could someone here do this for a reasonable price? Thanks in advance

[BlackST]

"reasonable" depends on what happened. If you're lucky the repair is reasonable, if the problem has gone beyond it's another story.
In Belgium you can contact "dobrevjetser" from this forum.

[unknown]

According to the picture and the motor IC damage you may have a motor failure too. I don't hope so.

Good luck

[Amarbir[CDR-Labs]]

Networkpc3000 proposed his services but I live in Europe and shipping my hard drive to China would cost me more than the servicing itself.

Well ,
Send One HDD anywhere in The World Does Not Mean Much Money .,Its Your Own Purgative Where You Like To Send It

[pepe]

Hi,

There are quite a few members from the EU. Dobrevjetser is probably the closest indeed.
We can also help if needed.

pepe

[networkpc3000]

Hi,

There are quite a few members from the EU. Dobrevjetser is probably the closest indeed.
We can also help if needed.

pepe

nice person. you can try get help from him

[hdrescue]

Hi

I send you PM
If are interest just contact me

Thanks

[CK]

Highly recommend Dobre for this one, he's the man for the job.

[pcimage]

Highly recommend Dobre for this one, he's the man for the job.

Yep, and he's probably your nearest too