Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
April 5th, 2011, 10:16
I have problem with my Maxtor DiamondMax 22 STM3500320AS, BIOS don't recognise him, start normaly and no strange sounds or noise... i have another same disk, I tryed to change electronic, but than it's recognised by BIOS but you can hear some noise and clicking from HDD and you can't access to him... Please HELP!
April 5th, 2011, 10:56
It's similar to seagate 7200.11.
Search forum's topics for .11 problem.
April 5th, 2011, 13:17
Note before you do this fix on the HDD you need proper diagnoses on this one. if you do the fix and it is not the 0 LBA or Busy fix you can brick you HDD. Changing out PCB will not help unless you change the adaptives which are in the ROM of this one. Adaptive have to be changed in order to use the new PCB
April 5th, 2011, 19:40
Fixed by infinity usb box for mobile devices and topic for fixing same baracuda hdd... thanks.....
Powered by phpBB © phpBB Group.