Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
September 25th, 2010, 5:47
Hi
Recently I got 2 of these drives, both came on Iomega USB box. They both have the same problem.
This is almost the same they do (you can see here):
http://www.youtube.com/watch?v=qUvoG0RVpiUIt seems it's trying to read the SA, but it can't, right?
None of them fell off, they just stopped working.
What do you suggest? PCB or heads? I tought it was spindle seizure, but spindle works fine.
Thanks
September 25th, 2010, 6:12
Terminal output?
September 25th, 2010, 6:29
Last time I checked it was this:
Rst 0x08M
RW cmd 002F req = 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 18 F0 9F E5 00 00 A0 E1
opts = 00000000
RW Err = 84150180
September 25th, 2010, 6:58
A thread on this problem exists over here.
st9320325as-320gb-sata-5400-t11332.html
September 26th, 2010, 6:41
Nobody solved this? I doubt that...
But thanks anyway.
September 26th, 2010, 12:50
Bad heads and/or media damage.
September 26th, 2010, 15:20
Thanks Dobrevjetser.
Powered by phpBB © phpBB Group.